Timing Tools Finder

OEM Search

Submit

Engine Code Search

Submit

VAG Camshaft Locking Tool VAG Camshaft Locking Tool

VAG Camshaft Locking Tool

This tool locks the camshaft in position on 1.2L FSi / TFSi petrol engines found across the VAG range from 2009 - 2017.

Do not use this item as a holding tool when loosening / tightening the camshaft sprocket!

  • Engine codes: CBZA | CBZB
  • OEM Equiv: T10414

VAG Intake Manifold Connector Release Tool

VAG Intake Manifold Connector Release Tool

These specialised tools are designed to quickly / safely release the intake manifold pipe connections on a range of Audi / VW direct injection turbo charged petrol engines.

This set includes two different sized release tools.

  • Engines: 1.0L | 1.2L | 1.4L FSI / TFSI
  • Applications: Audi A1 | A3 | Q2, VW Beetle | Golf (13-) | Jetta | Polo | Up!
  • OEM Equiv: T10527

VAG Pulley Counter Holding Wrench

VAG Pulley Counter Holding Wrench

A specialised wrench for counter holding the crankshaft pulley when loosening / tightening the centre bolt on selected VAG engines. This wrench has an angled shaft to assist access on transverse mounted engines.

  • Engines: 1.0L | 1.2L | 1.4L 4V injection, toothed belt drive
  • 750mm long fixed handle
  • OEM Equiv: T10475

VAG Pulley Holding Kit

VAG Pulley Holding Kit

SKU: ET1872A

VAG Pulley Holding Kit

A very handy kit, with a wide range of interchangeable pins, for holding the camshaft gear when loosening / tightening the centre bolt.

The adjustable jaw opening / interchangeable pin sets allows this tool to be used almost universally, although with the addition of the T10554 counterhold tool, this kit is specifically designed for VAG vehicles.

  • Adaptor sizes: ¯4.8mm, ¯6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm, cup 16mm x 20mm, Spline M10, M12
  • OEM Equiv: T10172 | T10554

VAG Timing Kit VAG Timing Kit

VAG Timing Kit

Comprehensive timing tool set for latest generation belt driven petrol TSI engines used across the VAG range. Includes support for 1.4L CoD (cylinder on demand) engines.

  • OEM Equiv: T10340 | T10476 | T10477 | T10494 | T10499 | T10504

VAG Timing Kit VAG Timing Kit

VAG Timing Kit

An updated comprehensive timing kit for late model belt driven petrol VAG engines. This kit includes an updated camshaft locking tool for post 2013 engines with Cylinder On Demand (COD).

For the camshaft holding kit refer ET1872A.

  • Engines: 1.0L 3 Cyl | 1.2L TFSI | 1.4L TFSI / TSI
VAG Timing Kit

VAG Timing Kit

An upgraded timing tool kit for VAG 1.2L | 1.4L | 1.6L TFSi / FSi engines.

  • Applications: Audi A1, Skoda Fabia | Octavia | Roomster, VW Beetle | Golf | Jetta | Polo | Touran
  • A DTI gauge (ET1101) is required, but not included in this kit, as most workshops will already have one.

VAG Timing Kit VAG Timing Kit

VAG Timing Kit

A comprehensive kit for locking the camshaft / crank in their timed position. This allows for the servicing of the camshaft drive chain. Includes guide pins required for aligning the supercharger (on those engines to which it is fitted).

  • Engine codes: CBZA | CBZB
  • Applications: Audi A1 | VW Beetle, Caddy, Golf, Passat | Skoda Fabia, Rapid, Roomster, Yeti.

VAG Timing Locking Kit VAG Timing Locking Kit

VAG Timing Locking Kit

This timing kit has been designed for VAG vehicles with 1.6L | 1.8L turbo chain driven engines from 2003. The kit includes a chain tensioner locking tool, a tensioner locking tool, camshaft alignment tool, and two camshaft / crankshaft pulley holding tools.

  • Engine: 1.6L | 1.8L FSI (03-08)