Brake Bleeders

Keep your Air Boy brake bleeder in great working condition! All consumable parts are easily replaceable with this renewal kit.

• O-ring
• Connector pin
• Plastic spring
• Connector hose
• Nipple
• End connector

Single person operation for quickly / cleanly bleeding brakes. Uses shop air for fast brake bleeding.

Replacement black top handle for the Air Boy brake bleeder.

Replacement nipple for the Air Boy brake bleeder.  This nipple connects the clear plastic hose (124143203) to the rubber end connector (124143205).

This nipple can be purchased individually, or as part of the brake bleeder refurbishment kit (124143155).

• For Air Boy brake bleeder (124143100)

A replacement o-ring for Air Boy brake bleeders. This o-ring is made from Nitrile and is designed for use with motor oil, not brake fluid,

For brake fluid please refer to SKU# 124143234.

• For use with motor oil, NOT brake fluid.

Replacement rubber end connector for the Air Boy brake bleeder. This connector connects to the clear plastic hose using a nipple (124143256).

This rubber end connector can be purchased individually, or as part of the 124143155 brake bleeder refurbishment kit.

• For 124143100 Air Boy brake bleeder

A replacement Air Boy cannister. This cannister is interchangeable with any cannister used in the Air Boy range.

This cannister is made from Acetal plastic which is resistant to most chemicals.

• 1.2 litre capacity

Tank holds compressed air allowing the unit to be used when disconnected from the air supply. Suits standard / ABS systems.

• Includes pressure relief / cut off valves
• Adaptor kit included
• 6L tank capacity

A very convenient tool to use in conjunction with the ETWH505HA pressure brake bleeder. Use the wrench to open the nipple. Used brake fluid then flows through the hose (into any convenient disposal bottle). The one way valve prevents air from reentering the system.

• 8mm brake bleeder wrench
• Silicone hose, with one way valve

A very convenient tool to use in conjunction with the ETWH505HA pressure brake bleeder. Use the wrench to open the nipple. Used brake fluid then flows through the hose (into any convenient disposal bottle). The one way valve prevents air from reentering the system.

• 10mm brake bleeder wrench
• Silicone hose, with one way valve

• 43m OD
• 3 Lug bayonet fitting

• 43.5mm OD block off cap
• 3 Lug bayonet fitting

• 42 x 3.0mm Female ISO "V" thread

This brake bleeder pressure adaptor suits Holden & Ford AU oval master cylinder reservoirs. For use on tandem reservoirs.

• Size: 2.9/16" x 4.5/8" (100 x 128mm)

• Application: Honda vehicles
• 2-15/16" (74mm) ID reservoirs
• 2 Lug bayonet fitting

• Application: Honda Accord
• 2-1/4" (56mm) ID reservoirs
• 2 Lug bayonet fitting

This master cylinder adaptor suits Hyundai / Kia vehicles, as well as some Nissan vehicles. For use with the ETWH505HA pressure style brake bleeder.

• 50.7mm OD
• 3 lug bayonet fitting

• Suits round reservoirs
• 2" - 3-3/8" (50-85mm)

• Application: Nissan vehicles
• 1-3/8" (34.5mm) ID reservoirs
• 2 Lug bayonet fitting

• 49.5mm OD reservoirs
• 3 Lug bayonet fitting

• Suits round reservoirs
• 1-3/16" - 2-3/16" (30 - 55mm)

• Applications: Chrysler, Holden etc
• 4-3/4" x 7" (125 x 185mm)

• Applications: Lexus / Toyota vehicles
• 43mm diameter

Pushes fluid up through the brake system.

Professional quality made of cast aluminium / fully rebuildable.

Also capable of performing pressure (top down) and vacuum bleeding.

Includes European adaptor. Plus attachments to fit bleed screws and clutch weep holes.