A professional adaptor kit for use with our ETWH505H pressure blake bleeder kit. This adaptor kit contains a wide range of vehicle specific adaptors, as well as universal style adaptors.
- Nitto style connectors
- 12 pce kit
Brake Bleeder Adaptor | 50.5mm | 3 Lug
This master cylinder adaptor suits Hyundai / Kia vehicles, as well as some Nissan vehicles, and the Tesla 3. For use with the ETWH505H pressure style brake bleeder.
- Applications: Tesla 3 (2017-) | Hyundai i30 (2012-), Kona (17-23) | Kia Picanto (2011-), Rio (2011-) | Nissan Qashqai (07-10)
- Nitto style connector fitting
- 50.5mm ID
- 3 lug design
Master Cylinder Adaptor | 45.2mm x 3mm
A master cylinder adaptor for a wide range of European (and BYD) vehicles. Designed for use with the Endeavour range of pressure brake bleeders.
- Applications: Alfa | Aston Martin | Audi | Bentley | BMW | BYD | Citroen | Fiat | Jaguar | Land Rover | Mercedes | Peugeot | Porsche | Renault | Tesla | Volvo | VW
- Nitto style connector fitting
- 45.2mm dia
- 3.0mm Female ISO "V" thread
Master Cylinder Adaptor | 43.5mm / 3 Lug
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a number of Chrysler (Jeep) / Holden vehicles.
- Suits a range of Chrysler / Holden vehicles.
- Nitto style connector fitting
- Equivalent to ATE adaptor #22
- 43.5mm (11/16") OD
- 3 Lug bayonet fitting
Universal Adaptor | Small
A master cylinder adaptor for universal use for vehicles with a round reservoir. Designed for use with pressure brake bleeders.
- Suits round reservoirs
- Nitto style connector fitting
- 1-3/16" - 2-3/16" (30 - 55mm)
Universal Adaptor | Large
A master cylinder adaptor for universal use for vehicles with a round reservoir. Designed for use with pressure brake bleeders.
- Suits round reservoirs
- Nitto style connector fitting
- 2" - 3-3/8" (50-85mm)
Brake Bleeder Adaptor | Nissan
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Nissan vehicles.
- Suits a range of Nissan vehicles.
- Nitto style connector fitting
- 1-3/8" (34.5mm) ID reservoirs
- 2 Lug bayonet fitting
Adaptor Toyota | Lexus
A specialised brake bleeder adaptor, for pressure style brake bleeders. Suits a range of Toyota / Lexus vehicles. Part of the Endeavour Range of brake bleeder tools.
- Suits Toyota / Lexus vehicles.
- Nitto style connector fitting
- 43mm dia
Master Cylinder Adaptor | Block Off Adaptor
A block off adadptor designed to be used in conjunction with the ETWH500BC-01 master cylinder adaptor.
- Suits a range of Chrysler / Holden vehicles.
- Nitto style connector fitting
- Block off adaptor
- 43.5mm OD block off cap
- 3 Lug bayonet fitting
Brake Bleeder Adaptor | 49.5mm | 3 Lug
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system. This adaptor suits a number of Nissan commercial vehicles.
- Suits a range of Nissan commercial vehicles and Holden Calais VF (LFX)
- Nitto style connector fitting
- 36mm / 49.5mm (1-5/16") OD reservoirs
- 3 Lug bayonet fitting
Master Cylinder Adaptor
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Honda Accord vehicles.
- Suits a range of Honda Accord vehicles.
- Nitto style connector fitting
- 2-1/4" (56mm) ID reservoirs
- 2 Lug bayonet fitting
Master Cylinder Adaptor | Honda
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Honda vehicles.
- Suits a range of Honda vehicles.
- Nitto style connector fitting
- 2-15/16" (74mm) ID reservoirs
- 2 Lug bayonet fitting
Brake Bleeder Adaptor | 4-3/4" x 7"
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Chrysler / GM vehicles which are fitted with a tandem reservoir.
- Suits a range of Chrysler / GM vehicles fitted with a tandem reservoir.
- Nitto style connector fitting
- 4-3/4" x 7" (125 x 185mm)
Brake Bleeder Adaptor | 50.5mm | 3 Lug
This master cylinder adaptor suits Hyundai / Kia vehicles, as well as some Nissan vehicles, and the Tesla 3. For use with the ETWH505H pressure style brake bleeder.
- Applications: Tesla 3 (2017-) | Hyundai i30 (2012-), Kona (17-23) | Kia Picanto (2011-), Rio (2011-) | Nissan Qashqai (07-10)
- Nitto style connector fitting
- 50.5mm ID
- 3 lug design
Master Cylinder Adaptor | 45.2mm x 3mm
A master cylinder adaptor for a wide range of European (and BYD) vehicles. Designed for use with the Endeavour range of pressure brake bleeders.
- Applications: Alfa | Aston Martin | Audi | Bentley | BMW | BYD | Citroen | Fiat | Jaguar | Land Rover | Mercedes | Peugeot | Porsche | Renault | Tesla | Volvo | VW
- Nitto style connector fitting
- 45.2mm dia
- 3.0mm Female ISO "V" thread
Master Cylinder Adaptor | 43.5mm / 3 Lug
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a number of Chrysler (Jeep) / Holden vehicles.
- Suits a range of Chrysler / Holden vehicles.
- Nitto style connector fitting
- Equivalent to ATE adaptor #22
- 43.5mm (11/16") OD
- 3 Lug bayonet fitting
Universal Adaptor | Small
A master cylinder adaptor for universal use for vehicles with a round reservoir. Designed for use with pressure brake bleeders.
- Suits round reservoirs
- Nitto style connector fitting
- 1-3/16" - 2-3/16" (30 - 55mm)
Universal Adaptor | Large
A master cylinder adaptor for universal use for vehicles with a round reservoir. Designed for use with pressure brake bleeders.
- Suits round reservoirs
- Nitto style connector fitting
- 2" - 3-3/8" (50-85mm)
Brake Bleeder Adaptor | Nissan
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Nissan vehicles.
- Suits a range of Nissan vehicles.
- Nitto style connector fitting
- 1-3/8" (34.5mm) ID reservoirs
- 2 Lug bayonet fitting
Adaptor Toyota | Lexus
A specialised brake bleeder adaptor, for pressure style brake bleeders. Suits a range of Toyota / Lexus vehicles. Part of the Endeavour Range of brake bleeder tools.
- Suits Toyota / Lexus vehicles.
- Nitto style connector fitting
- 43mm dia
Master Cylinder Adaptor | Block Off Adaptor
A block off adadptor designed to be used in conjunction with the ETWH500BC-01 master cylinder adaptor.
- Suits a range of Chrysler / Holden vehicles.
- Nitto style connector fitting
- Block off adaptor
- 43.5mm OD block off cap
- 3 Lug bayonet fitting
Brake Bleeder Adaptor | 49.5mm | 3 Lug
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system. This adaptor suits a number of Nissan commercial vehicles.
- Suits a range of Nissan commercial vehicles and Holden Calais VF (LFX)
- Nitto style connector fitting
- 36mm / 49.5mm (1-5/16") OD reservoirs
- 3 Lug bayonet fitting
Master Cylinder Adaptor
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Honda Accord vehicles.
- Suits a range of Honda Accord vehicles.
- Nitto style connector fitting
- 2-1/4" (56mm) ID reservoirs
- 2 Lug bayonet fitting
Master Cylinder Adaptor | Honda
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Honda vehicles.
- Suits a range of Honda vehicles.
- Nitto style connector fitting
- 2-15/16" (74mm) ID reservoirs
- 2 Lug bayonet fitting
Brake Bleeder Adaptor | 4-3/4" x 7"
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Chrysler / GM vehicles which are fitted with a tandem reservoir.
- Suits a range of Chrysler / GM vehicles fitted with a tandem reservoir.
- Nitto style connector fitting
- 4-3/4" x 7" (125 x 185mm)
| SKU | ETWH500C |
| Barcode # | 9321280319202 |
| Brand | Automotive |
| Product weight | 3.5000kg |
| Shipping weight | 3.800000kg |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
You may also like
Pressure Brake Bleeder | Hand Operated
Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.
- 2.8 litre capacity
- Supplied with 44mm adaptor (ETWH500BC-06) that suits many European (and BYD) vehicles
- Other adaptors available separately
Others also bought
Socket Holder Tray
Keep your sockets organised. Holds 17x standard | 17x deep sockets - 1/2" Sq Drv. Features sizes marked on top of the posts for easy identification.
- 10 - 27mm
- 1/2" Sq Drv standard | deep sockets
Pressure Brake Bleeder | Hand Operated
Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.
- 2.8 litre capacity
- Supplied with 44mm adaptor (ETWH500BC-06) that suits many European (and BYD) vehicles
- Other adaptors available separately
12V Brake & Clutch Pressure Bleeder | Digital
The SmokeMan ET4396 is a compact, high-performance pressure brake designed for fast, clean, and reliable brake fluid exchange. This unit streamlines brake bleeding, allowing it to be undertaken by one person - no need for a second technician. Powered by the vehicle's own battery - no shop air required!
- Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
- Auto shut off function when pressure falls below 0.5 bar.
- Includes premium adaptor kit
Isuzu NPR Rear Crankshaft Oil Seal Tool
This Isuzu Oil Seal Tool is a specialised tool for the precise installation of rear crankshaft oil seals and oil slingers in Isuzu medium-duty trucks. Compatible with NPR models featuring 4.8L 4HE1 and 5.2L 4HK1 diesel engines, this tool ensures a secure fit while minimizing the risk of damage during the installation process.
- Applications: Medium duty NPR - 4.8L 4HE1 | 5.2L 4HK1
- OEM equiv: J-432082-RR
More from this category
Air Boy Brake Bleeder Clear Hose
Replacement clear hose for Air Boy brake bleeders. This hose can be purchased individually, or as part of the brake bleeder refurbishment kit (124143155).