The Air Boy 90 degree nozzle is now available in a new pushfit version. The function of the nozzle remains unchanged, but the pushfit connector makes it possible to remove the nozzle from the tip. The 90 degree nozzle is perfecct for cleaning out cylindrical filters etc.
The pushfit connector actively locks onto the blow gun pipe, and will not come off until the collar is lifted. Suits all 8mm dia Air Boy blow guns.
- Ideal for blowing out filters
- Works with all Air Boy 8mm dia blow guns
- Made in Denmark
Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 25mm dia is suitable for flushing hoses up to 7/8".
- Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
- Actively locks onto the blow gun pipe.
- Non-marring rubber surface protects against scratching delicate surfaces.
The Air Boy TURBO nozzle makes any Air Boy blow gun (with 8mm pipe) unblockable and increases airflow by 100%. The bypass nozzle makes it possible for the blow gun to absorb air throughs the sides, which provides for extra high airflow. The air also flows through the holes in the side, should the tip be blocked.
- 34mm overall length
- Suits any Air Boy blow gun with 8mm tube
- Cannot be removed once attached
An optional nozzle for use with the Air Boy range of thrust guns. This nozzle has holes on the side, providing high volumes of airflow at 90 degrees to the pipe.
This nozzle is ideal for blowing out filters. This nozzle is provided with the 124140009 thrust gun, and is available separately for the other thrust guns.
A replacement THRUST nozzle for the Air Boy range of high airlflow THRUST blow guns. This nozzle increases the airflow by 100% due to the venturi principle. The nozzle is also unblockable, as the airflow can escape from the size if the tip becomes blocked.
- 52mm overall length