Wrenches


Coolant Cap Wrench

Coolant Cap Wrench

BMW

SKU: ET7052

Coolant Cap Wrench

  • Suits most E60-E93 | F01-F86 vehicles
  • 3/8" Sq Drv

Fan Nut Wrench | 32mm

Fan Nut Wrench | 32mm

SKU: DA3388

Fan Nut Wrench | 32mm

Removes lock nuts on thermo viscous fans found on BMW | Ford (and other vehicles). Made from tempered pressed steel with PVC dipped handle.

  • 32mm
  • Straight design
  • 380mm overall length

Ford Fan Clutch Holder

Ford Fan Clutch Holder

Specially designed slots fit over and grip firmly on three of the studs holding the viscous fan clutch assembly, to allow the release of the locking nut.

  • Applications: Ford Falcon | Fairline, and many other vehicles.
  • Length: 450mm (17-3/4")

Ford Fan Clutch Wrench Ford Fan Clutch Wrench

Ford Fan Clutch Wrench

This set comprises a special clutch holder and nut wrench for replacing the water pump in Ford vehicles.

  • 1-7/16" | 2-5/16" jaw openings

Ford Viscous Fan Clutch Wrench Set

Ford Viscous Fan Clutch Wrench Set

A specialised wrench set for fan clutch removal and replacement on Ford vehicles. Two hub wrenches (32mm & 36mm) and one special holding bar to fit fan clutches.

  • Straight wrenches | 385mm (15-1/4") length
  • 32mm | 36m jaw openings
  • Ford fan clutch holder (DA3387)

Mercedes Fan Clutch Wrench Mercedes Fan Clutch Wrench

Mercedes Fan Clutch Wrench

Special open ended wrench for the replacement of radiator fan hubs.

  • 65mm opening
  • Engines: M103 | M104 | M119 | M120

Mercedes Viscous Fan Clutch Wrench

Mercedes Viscous Fan Clutch Wrench

Special open ended spanner for replacement of the radiator fan hub. 65mm x 400mm OL Models: M103 x 6 cylinders | M104 x 6 cylinders 24v | M119 x 8 cylinders 32v | M120 x 12 cylinders 48v

Thermo Viscous Fan Nut Wrench Set

Thermo Viscous Fan Nut Wrench Set

These wrenches, with an offset design, are suitable for the removal of themo viscous fans on BMW | Ford vehicles. Made from tempered pressed steel with PVC dipped handles.

  • 32mm | 36mm jaw openings
  • Offset design

VAG Coolant Pump Thermostat Wrench

VAG Coolant Pump Thermostat Wrench

A specialised wrench for the removal / installation of the coolant pump thermostat on selected (post 2013) VAG TSI / TDI engines.

  • Applications: Audi A3 (13-) | VW Golf (13-) | Skoda Octavia (13-) | SEAT Leon (13-)
  • Engines: 1.0L TFSI | 1.2L TSI | 1.4L FSI | 1.4L TDI | 1.4L TFSI
  • OEM Equiv: T10508

VAG Radiator / Coolant Cap Wrench

VAG Radiator / Coolant Cap Wrench

This wrench is designed to help remove the coolant expansion tank cap fitted to a range of VAG vehicles from 2008. Due to their location, these caps can be difficult to access, and can be difficult to remove as the seals of the caps often stick.

  • Applications: Audi A1 (from 2010) | A3 (from 2012) | Q2 (from 2016) | Q3 (form 2011) | A6 (from 2018), VW: Touran (from 2003) | Caddy III / IV (from 2015) | Passat (from 2010) | Tiguan (from 2007) | Golf VI / VII / VIII (from 2008), Amorok (from 2010), Jetta VI (from 2010), Beetle (from 2011) | Polo (from 2017) | T-Roc (from 2017) | T-Cross (from 2018) | ID.5 (from 2021)
  • Suits OEM caps 2Q0121321 | 2Q0121321A (82mm across the flats | 20mm wide | 7 indents)
  • 3/8" Sq Drv

Viscous Fan Hub Wrench

Viscous Fan Hub Wrench

For removing / installing the viscous fan hubs on Ford | Holden 8 cylinder vehicles.

  • 36mm
  • Overall length: 375mm
  • Straight design