Screw / Stud Extractors

Special design for removing damaged Torx / Torx Plus (and inhex) screws.

• Sizes: 10mm Hex (3-6mm) | 12mm Hex (7-8mm) | 14mm Hex (10-12mm)

This stud removal kit is designed for use in tight restricted areas. Stubby removal sockets together with a low profile 'Go Thru' ratchet.

• Removal sockets: 6 | 8 | 10 | 12mm
• Go Thru ratchet (14mm x 17mm)

For removing hard to reach damaged nuts on studs or bolts. Loosen anticlockwise using an open end wrench. Do NOT use with an impact gun.

• Use with an open end wrench
• Sizes: 8, 10, 11, 12, 13, 14, 15, 16, 17, 19mm

A high quality kit of left handed drills. These are ideal for use for screw removal as the left handed motion can help loosen stuck screws.

• 2, 3, 4, 5, 6, 8mm

This nut splitter is designed to crack the nut, when access over the nut is not possible. Ideal for use on frozen on / rusted on nuts.

• For nuts up to 15/16" (23mm)

Remove broken studs, bolts, socket screws etc. Heat treated Chrome Moly steel. Sizes 1/8" through 13/32"

• Left hand extractors / Right hand drills
• 7/64", 9/64", 5/32", 1/4", 19/64"

• Tip drills out / grooved section removes
• 1/4" hex shank (fits most impact drivers)
• Removes bolts: 4 - 8mm
• Max applying dia: 1.8 - 4.5mm

Made from special heat treated steel, this kit is designed to remove broken bolts / screws / studs. The extractors have left hand threads which lock into, and then remove the damaged component. This set contains six extractors for use on bolts / screws from 3 - 25mm.

• Extractor 1: 1/8 - 1/4" (52mm OL)
• Extractor 2: 1/4 - 5/16" (58mm OL)
• Extractor 3: 5/16 - 7/16" (66mm OL)
• Extractor 4: 7/16 - 9/16" (74mm OL)
• Extractor 5: 9/16 - 3/4" (81mm OL)
• Extractor 6: 3/4 - 1" (92mm OL)

Sharp undercut edges | Long flutes. A quick and easy way to remove broken screws, bolts etc Made from heat treated Chrome Moly steel.

• Sizes: 3/8", 5/16", 15/64", 3/16", 1/8"

These hex type screw extractors are designed for removing broken bolts / studs by drilling them out.

Not for use with air impact wrenches

• 12mm hex: 1/8, 3/16, 1/4, 3/8"
• 12mm hex: 3, 4, 5, 5.5, 6, 8mm
• 16mm hex: 11, 12, 14mm, 1/2"
• All extractors 28mm long

• Sizes: 1/4" | 5/16" | 3/8" | 1/2" | 9/16"
• 1/2" Sq Drv

• Sizes: 6 | 8 | 10 | 12 | 14mm
• 1/2" Sq Drv

These stud puller sockets are designed to easily remove engine studs. They use a cam roller style operation which limits damage to the stud, and eliminates the need for excessive force.

The sizes in this kit suit a wide range of stud applications on modern passenger and light commercial vehicles.

• Sizes: 1/4" | 5/16" | 3/8" | 7/16"

These stud puller sockets are designed to easily remove engine studs. They use a cam roller style operation which limits damage to the stud, and eliminates the need for excessive force.

The sizes in this kit suit a wide range of stud applications on modern passenger and light commercial vehicles.

• Sizes: 6mm | 8mm |10mm | 12mm
• 1/2" Sq Drv

An ideal kit for removing engine studs without damaging threads. A safer option than traditional stud removers. This kit contains 4 pairs of metric removers to suit most common stud sizes.

• Metric sizes: M6 x P1.0 | M8 x P1.25 | M10 x P1.25 | P10 x P1.5