These stud puller sockets are designed to easily remove engine studs. They use a cam roller style operation which limits damage to the stud, and eliminates the need for excessive force.

The sizes in this kit suit a wide range of stud applications on modern passenger and light commercial vehicles.

• Sizes: 1/4" | 5/16" | 3/8" | 7/16"
• 1/2" Sq Drv

This practical tool helps test diesel injectors for leakage, spray patterns, opening pressure, and leakage between injector needle and injector body.

Suitable for pressure-activated injectors. An electronic switching device (ET6632) is needed for this unit to be able to test common rail type injectors.

• With transparent tank and two connecting pipes - M12 | M14
• Pressure range: 0-600 Bar (0-8700 PSI)

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

The PPPWM is an adapter that is plugged into Power Probe circuit testers with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).

The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. Ideal for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.

Duty cycle adjustable 5% - 100%.

For 12V / 24V use. 10A max continuous output.

These stud puller sockets are designed to easily remove engine studs. They use a cam roller style operation which limits damage to the stud, and eliminates the need for excessive force.

The sizes in this kit suit a wide range of stud applications on modern passenger and light commercial vehicles.

• Sizes: 1/4" | 5/16" | 3/8" | 7/16"
• 1/2" Sq Drv

An ideal kit for removing engine studs without damaging threads. A safer option than traditional stud removers. This kit contains 4 pairs of metric removers to suit most common stud sizes.

• Metric sizes: M6 x P1.0 | M8 x P1.25 | M10 x P1.25 | P10 x P1.5