Tyre Inflators

• Modes: Inflate | Deflate
• Touch screen technology
• Inflation speed: 2,500 l/min @ 10 bar
• Indoor workshop use (IP41)
• Backlit LCD screen
• 240V
• Individual calibration certificate
• Clip on connector

Genuine repair / renewal kit for all MK3
/ MK4 inflators. Also compatible with
Jamec TDR2000

The Sonsbeek bar style tyre inflator has an aluminium reader bar, making it ideal for inflating / deflating / measuring water filled tyres. These are commonly used on tractors / agricultural vehicles.

This inflator is designed for rugged use, and has a pressed steel lever, as well as a rubber grip on the dual angle hold on chuck.

• 10 - 120 PSI measurement range
• 1/4" BSP female connector
• Dual angle hold on chuck

The Sonsbeek car tyre inflator is a professional quality unit designed for inflating / deflating / measuring car tyres. One button operation, with rubber impact protector on the gauge. Ideal for tyre fitters / general trade use.

• Clip On chuck
• 0 - 60PSI measurement range. Optimal readying at 30 PSI
• 1/4" NPT female inlet

The legendary driveway tyre inflator made in the UK for Australian conditions.

Supply Pressure: Maximum 13.8 BAR, Minimum 6.9 BAR, Recommended clean filtered air

Body Construction: Die cast aluminium with steel operating lever and impact absorbing bumper

Pressure Range: 0-9.6 BAR (0-138lbf/in2) standard

Gauge: Linear with magnifying window

• Inlet size: 1/4" BSP
• Measurement range: 0 - 160 PSI

The legendary driveway tyre inflator made in the UK for Australian conditions - is now also available in a digital model. This digital model is suitable for inflating truck tyres.

• Clip On chuck
• 0 - 160 PSI measurement range
• 1/4" NPT female inlet

The Sonsbeek truck tyre inflator is designed to reliably inflate truck tyres up to 220 PSI. The inflator has a large 90mm dial gauge for easy reading. The unit is designed for inflation, deflation and measurement.

The inflator is designed for rugged applications, and is supplied with a rubber impact protector on the gauge, rubber grip on the chuck, and a pressed steel lever.

One button operation

• 90mm dial for easy reading
• 220 PSI scale
• 1m hose length
• Rubber gauge protector

Repair kit for the Sonsbeek truck tyre inflator.

Replacement gauge only for the Sonsbeen truck tyre inflator.

Professional quality.
Hand trigger inflate / thumb operated deflate, for fast operation.
Highly accurate.
Individual calibration certificate.
Inflates up to 170psi.

• Easy to read backlit display
• Extra long 1.8m hose