Accessories
Power Probe 20 Ft Extension Cable
A 20 foot extension cable for Power Probe 3 circuit testers. Great for working on trucks, trailers and oversized vehicles.
- Original part # PN3049
Power Probe 3 Battery Clip Set
This clip set allows your Power Probe circuit tester to be powered from any 12V source. Suits all Power Probe 3 models only.
- Original part # PN3046
Power Probe 5V Tip Adaptor
Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.
Power Probe Adaptor Set
This Power Probe kit contains two adaptors - a male / male and a female / female adaptor. The 4mm connectors are suitable to use with all standard multimeters.
- male / male adaptor
- female / female adaptor
Power Probe Alligator Clip
Banana jack alligator clip. This clips suits all Power Probe circuit testers.
- Original part # PN024
Power Probe Blade Adaptor Kit (2 Pce)
This Power Probe adaptor kit contain two adaptors, one with a blade probe for tapping into fuse sockets, and the second, a needle probe for back probing connectors.
- Allows for pinpoint diagnostic testing
- 4mm banana plugs
- Suits all Power Probe circuit testers
- Old part numbers: AA4 | AA6
Power Probe Current Measuring Adaptor
Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!
Power Probe Gold Series Lead Set
The Gold Series Lead Set gives you the ability to extend your Power Probe circuit tester.
This kit includes 3 extension leads, 2 adaptors, two piercing probes and an extra probe tip. A must have kit for diagnosing electrical issues.
- Super flexible 10 gauge leads - stackable (1ft | 3ft | 6ft)
- Power Probe replacement tip
- Small piercing probe (Green) - for 20-28 gauge wires
- Large piercing probe (Yellow) - for 8-18 gauge wires
- 4mm female - female adaptor
- 4mm male - male adaptor
- Alligator clip adaptor
- Adaptor cap
Power Probe III Cigarette Adaptor
Power Probe cigaratte adaptor for use with Power Probe 3 | 3S | 3EZ. Designed to allow Power Probe to be powered through the vehicle's cigarette port.
- Original part # PN3048
Power Probe Mini Probe
Easy to use plug-in style current testers.
A simple way to test any USB (especially on car accessory outlets).
Power Probe Pulse Width Modulation Adaptor
The PPPWM is an adapter that is plugged into Power Probe products with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).
The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. It is mainly used for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.
Duty cycle adjustable 5% - 100%.
For 12V / 24V use. 10A max continuous output.
Power Probe Tip
Replacement 3" probe tips, suitable for all Power Probe units. These are the original tips supplied with all Power Probe units. For a longer 6" tip, please refer to PPTK0043.
- With 4mm banana jack
- Original part # PN3015-BLK
- 2 pack
Power Probe Tip | 6"
Our new longer 6" tip for getting into those hard to reach areas.
- With 4mm banana jack
- Sold individually
- See PPTK0024 for original 3" size in a twin pack
Power Probe Wire Extension | 3 Ft
A 3 foot wire extension for use with all Power Probe testers, plus most other diagnostic equipment which uses a standard 4mm banana plug.
- 3 foot wire extension
- 10 gauge multi strand wire
- 4mm banana plug connectors
- Stackable for versatility
- Original part # PNLS025-36RED
Power Probe Wire Piercing Kit
Very sharp probes suitable for piercing cable. Kit comes with two probes, one for 8-18 gauge wire, and the other for 20-28 gauge wire.
4mm banana jacks suit all standard multimeters / Power Probe units.
- Yellow - suits 8-18 gauge wire
- Green - suits 20-28 gauge wire