The Power Probe TST12V Mini Probe is a 12V cigarette outlet tester designed to quickly check your vehicle's power outlets. It illuminates when power is present, saving time by eliminating the need to search for phone charger cables. This compact and efficient tool is ideal for verifying current flow in accessory sockets.

The Power Probe Temperature Kit is designed to give readings for ambient temperature and from the wireless Temperature Probe.

The Tempkit has a built-in temperature sensor in the base unit, plus a temperature sensor in the remote wireless Probe. This allows for multiple readings simultaneously.

One additional wireless Temperature Probe (TEMPPROBE) is available separately, for a second temperature reading.

• Measuring Range: -22°C to 70°C
• Wireless Transmitter Distance: 5m (16.5 Feet)
• Accuracy ±2.0°F(±2.0°C)
• Backlit LCD Display
• Requires 2x AA and 2x AAA Batteries (NOT INCLUDED)

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

The PPPWM is an adapter that is plugged into Power Probe circuit testers with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).

The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. Ideal for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.

Duty cycle adjustable 5% - 100%.

For 12V / 24V use. 10A max continuous output.

The DM300AUTO is much more than a complete True RMS Digital Multimeter. It also includes several other functions of great utility for professionals in the automotive sector, such as checking the status of fuse protection, providing out of spec reading alerts, detecting parasitic draw, guiding automotive tests, checking the correct charging process of the alternator and measuring possible cranking voltages in the supply circuit.

The TFT colour display and the user friendly menu make this instrument an indispensable tool for automotive professionals.

• Measures current Flowing through fuses without removing the fuse (up to 80A)
• Fuse Voltage drop testing
• Guided automotive test such as Cranking Voltage / Alternator Charging
• AC/DC Voltage measurements up to 1000V
• Current measurements up to 30A
• Measures resistance, continuity and diode testing
• Frequency and duty cycle for PWM signals

The Power Probe PPTK0029 is a 20-foot extension cable designed for use with the Power Probe 4 and Maestro diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

The Power Probe PPTK0027 is a 20 foot extension cable for use with Power Probe 3 and 3EZ diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

• 20 foot extension cable
• Original part # PN3049

This clip set allows the Power Probe 3 circuit tester to be powered from any 12V source. Suits all Power Probe 3 models only.

• Original part # PN3046

A Power Probe cigarette adaptor for use with Power Probe 3 | 3S | 3EZ. Allows the Power Probe circuit tester to be powered through the vehicle's cigarette port.

• Original part # PN3048

Replacement 3" probe tips, suitable for all Power Probe circuit testers. These are the original tips supplied with each Power Probe unit. For a longer 6" tip, refer PPTK0043.

• With 4mm banana jack
• Original part # PN3015-BLK
• 2 pack

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector