Engine

A precision instrument to accurately measure the strength of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue^¨ content. A very versatile unit, especially with the ability to measure AdBlue concentration.

• Temperature corrected prism for improved accuracy
• Adjustable focus eyepiece
• Simple calibration using distilled water
• Supplied with pipette & storage case

A specialised kit for removing the cylinder liner on Caterpillar, Cummins, Mercedes OM460 and Volvo D13 engines.

This tool works on wet liners ONLY, with a 3-7/8" to 6-1/4" bore, up to 15" deep, with a minimum wall thickness of 0.148.

• Applications: Cummins | Mack | Detroit | International | Volvo and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16, Maxxforce DT, DT360, DTA360, DTA466, DT466, DT466E, DT530 (PLN), DT530E, DT570, HT570.
• Spring loaded arms adjust to fit the liner automatically.
• For cylinder liners up to 15" deep.

A specialised socket for manually turning engines on selected CAT / Mack vehicles. This socket makes it easier to adjust valve lashes, injectors etc. Use with a breaker bar. Quality one piece construction.

• Applications:Caterpillar CAT 3200 | 3406 Series C13 / C15 / C16 / 3208 / 3400 / 3406e / 3508 / 3512 / 3500 EUI/MUI & Mack E-7 | E-7 ETEC
• OEM equiv: ENL80-0054 / 9S9082

Cup style oil filter wrench that suits a wide range of Isuzu / Hino / Fuso / UD heavy duty trucks.

• Applications: Fuso (Euro 5), Hino (17T - Euro 4 & 5), Isuzu (4.9T | 6.5T | 8.7T | 9.5T | 11T | 17T), UD (Euro 5)
• 118mm | 16 Points
• 1/2" Sq Drv

This specialty tool is designed specifically to remove and install the AdBlue tank lid without damaging it. Applications include Hino 200 / 300 series trucks. Part of the Endeavour range of specialty oil filter wrenches.

• Engine code: Hino N04C (from 2019 onwards)
• 185mm diameter | 7 Point
• Suits OE lid: 17478-78010
• 1/2" Sq Drv

A specialised manual sleeve puller set which is designed to remove cylinder sleeves from most bus, tractor, truck and other vehicle engines.

The kit includes sleeve remover plates to suit: Fuso 3.5 tons, Fuso 15 tons, Fuso 330, Hino 750, Scania 310, Volvo FL10 | FM12. These plates will also suit many other vehicles.

The kit is suitable for both wet and dry sleeves and does not require removal of head studs.

• Sleeve pulling plates: 119mm ID | 130mm OD, 129mm ID | 142mm OD, 126mm ID | 138.5mm OD, 134mm ID | 140mm OD, 136.5mm ID | 147mm OD, 126mm ID | 140mm OD

This kit is designed for testing truck cooling systems. The kit includes seven adaptors that suit larger radiators found on trucks, construction equipment etc. A gauge / pump is also included.

This kit covers the majority of European trucks, including DAF.

• Mercedes / Deutz radiator adaptor
• Volvo radiator adaptor (M45 x 3.0)
• MAN radiator adaptor (M52 x 3.0)
• DAF / IVECO radiator adaptor (M45 x 4.0)
• DAF / ERF radiator adaptor (M72 x 4.0)
• Renault radiator adaptor (M42 x 3.0)
• Scania radiator adaptor (M62 x 4.0)

This kit is designed for testing truck cooling systems. The kit includes four tapered adaptors that suit larger radiators found on trucks, construction equipment etc. A gauge / pump is also included.

• Suitable for American | European | Japanese style adaptors
• Tapered adaptors: 17-35mm | 26.5-41mm | 37-50mm | 47-60mm
• Gauge / pump: 0-35 PSI (0-2.5 Bar)

Designed to engage the engine flywheel ring gear, the tool allows technicians to accurately rotate and position the crankshaft while reducing the risk of timing errors during assembly.

• Engines:Renault: DTI 11 | DTI 13 | DXi 11 | DXi 13, Volvo: D9 | D9A | D10 | D11 D12 | D16A | D16B | D16C | D6 | D7A| D7B | D7C
• Applications: VN | VNL | VHD | VNM
• 1/2" Sq Drv
• OEM equiv: 9996956

A flywheel rotation tool for Volvo / Mack trucks. Simply remove the flywheel cover and insert the rotation tool.

• Application: Volvo / Mack trucks (MP8 | MP10)
• OEM equivalent: 88800014