A specialised manual sleeve puller set which is designed to remove cylinder sleeves from most bus, tractor, truck and other vehicle engines.
The kit includes sleeve remover plates to suit: Fuso 3.5 tons, Fuso 15 tons, Fuso 330, Hino 750, Scania 310, Volvo FL10 | FM12. These plates will also suit many other vehicles.
The kit is suitable for both wet and dry sleeves and does not require removal of head studs.
- Sleeve pulling plates: 119mm ID | 130mm OD, 129mm ID | 142mm OD, 126mm ID | 138.5mm OD, 134mm ID | 140mm OD, 136.5mm ID | 147mm OD, 126mm ID | 140mm OD
| SKU | ET1336A |
| Barcode # | 9321280335981 |
| Brand | Automotive |
| Product weight | 35.0000kg |
| Shipping weight | 35.000000kg |
| Vehicle Make | Fuso |
| Vehicle Make | Scania |
| Vehicle Make | Hino |
| Vehicle Make | Volvo |
| Vehicle Make | DAF |
12 Months
You may also like
CAT | Cummins Universal Cylinder Liner Puller
A specialised kit for removing the cylinder liner on Caterpillar, Cummins, Mercedes OM460 and Volvo D13 engines.
This tool works on wet liners ONLY, with a 3-7/8" to 6-1/4" bore, up to 15" deep, with a minimum wall thickness of 0.148.
- Applications: Cummins | Mack | Detroit | International | Volvo and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16, Maxxforce DT, DT360, DTA360, DTA466, DT466, DT466E, DT530 (PLN), DT530E, DT570, HT570.
- Spring loaded arms adjust to fit the liner automatically.
- For cylinder liners up to 15" deep.
More from this category
CAT | Cummins Universal Cylinder Liner Puller
A specialised kit for removing the cylinder liner on Caterpillar, Cummins, Mercedes OM460 and Volvo D13 engines.
This tool works on wet liners ONLY, with a 3-7/8" to 6-1/4" bore, up to 15" deep, with a minimum wall thickness of 0.148.
- Applications: Cummins | Mack | Detroit | International | Volvo and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16, Maxxforce DT, DT360, DTA360, DTA466, DT466, DT466E, DT530 (PLN), DT530E, DT570, HT570.
- Spring loaded arms adjust to fit the liner automatically.
- For cylinder liners up to 15" deep.