Measures Visual Light Transmission (VLT) through windows treated with aftermarket window tint film. Each probe has a magnet that will hold against the glass for measurement.

• Two piece design allows users to check all windows on vehicle, including all fixed windows.
• Essential testing tool for vehicle inspections.
• 4x AAA batteries included.

Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.

• 4 colours | 0.7mm (0.028") OD back probe pins
• Made in UK quality
• 1000V CAT III 20A

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

A genuine Sunglag - made in Japan - automatic centre punch. Tool strikes a blow when pressure applied. Cap adjusts force of blow.

Simply adjust to desired spring tension. Then press firmly to generate an automatic centre punch. No hammer required for operation.

• Replacement tip available (AP-6).

The ET6275 Survivor Socket is a universal emergency socket designed to grip and remove damaged nuts and bolts with ease. This 1/4 hex drv socket features a special locking design, allowing it to work with fastener profiles ranging from 9mm to 21mm.

Removes almost any type of wing nut, nuts, bolts including Spline, Torx¨, Hex etc.

• Not suitable for use with impact tools
• 1/4" hex drive
• 9-21mm

Fast / accurate current measurement at the fuse box. Hold / peak function for detecting current surges.

• 20A max current
• 0 - 48V DC measuring voltage
• 0.01A display resolution

Allows easy connection into fuse sockets. Tests circuit current up to 30A. Maintains fuse protection while connected.

• Suits Maxi Blade fuses
• Resolution: 0.1A | Accuracy /- 2%
• 30A rating

Allows easy connection into fuse sockets. Tests circuit current up to 30A. Maintains fuse protection while connected. Suitable for electrical systems up to 48V DC max.

• Suits Mini Blade fuses
• Resolution: 0.1A | Accuracy /- 2%
• 30A rating

Specially designed for testing insulation on high voltage cables. An ESSENTIAL tool for working on hybrid or electric vehicle systems. Circuitry inside the unit is built specifically to safely cope with high voltages and currents found in these types of vehicle.

• Conforms to EN61010 / CAT III (1000V
• Supplied with test leads, batteries and carry case

The EV Tester from Power Probe is the ultimate tool for EV technicians. This compact, ECE-R100 compliant multimeter combines the 3 essential EV testing tools; 1000V CAT III AC/DC Voltmeter, 1kV insulation tester, and true milliohm meter into one device. It accurately measures resistance from 0.001m to 40k , ensuring precise diagnostics. Bluetooth compatible, it includes smart diode tests, wire length calculations, capacitance up to 1000µF, insulation tests up to 1000VDC, and more. With a 2.8" TFT screen, 400 test result storage, and the ability to measure temperatures up to 400¡C, the EV Tester is the perfect, all-in-one solution for EV repair and maintenance.

• Insulation resistance test up to 1000 VDC and 200G w/PI, DAR Calculation
• Diode Test with Smart Mode testing
• Wire Length Calculator - determine wire length by wire gauge
• Remote ÒTest" button on test leads
• Internal memory allows storage of 400 test results
• Wireless Connection via Power Probe Link App