The AutoSim Pro Master Kit is a professional-grade automotive sensor simulator and signal generator, designed to streamline diagnostics and fault analysis across a wide range of vehicle systems. Whether you're working on cars or trucks, this handheld device replicates real-world sensor and actuator signals, allowing technicians to test wiring, ECUs, and components without unnecessary replacements.

Detect whether the ECU, a feed, plug in connection, or sensor is defective. Eliminate faults without simply replacing parts on suspicion only.

Key features:

• Signal Simulation: Generates voltage, frequency, PWM, and O sensor signals to mimic real sensor behavior.
• Waveform Variety: Supports sine, square, triangular, and ramp signals with adjustable frequency and amplitude.
• Actuator Activation: Drives actuators with up to 4A continuous current, simulating real operating conditions.
• Precision Control: Offers fine-tuned output settings with 0.1% duty cycle accuracy and 10mV voltage steps.
• User-Friendly Interface: Illuminated 2.4" TFT LCD display and intuitive function keys for quick setup and operation.
• Robust Protection: Includes reverse polarity, over-voltage, thermal shutdown, and short-circuit safeguard.

CONTAINS ET0098PRO PLUS:

• Insulated crocodile clips (Red & Black)
• Back Probe set (5 needles)
• Crocodile Clip 25A, Red & Black
• Crocodile Clip 15 A, Blue
• Pluggable Terminal Block (2-Pin, 5mm)

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

PPDRAW + PPFUSE Combo Pack - Diagnose Smarter, Save More Take full control of automotive diagnostics with this powerful pairing. The PPDRAW Draw Monitor connects via OBDII to supply 12V power, monitor battery voltage, and detect leakage currentÑplus it backs up vehicle memory during battery replacement. Pair it with the PPFUSE Fuse Monitor to track down parasitic draws across circuits with real-time amp readings, no fuse removal required.

Together, they offer unmatched accuracy, convenience, and mobilityÑeverything you need to monitor, diagnose, and repair electrical issues fast. Save by bundling both tools and streamline your diagnostic game .

The Power Probe PP3EZKIT is an all-in-one automotive diagnostic kit designed to streamline fault-finding and component testing. It allows you to power up and activate components directly, trace wiring and circuit faults with precision, and expand troubleshooting capability using advanced probe tips and accessories. Ideal for fast, accurate electrical diagnostics across modern vehicle systems.

• Quickly Locate Short and Open Circuits - pinpoint wiring faults with speed and precision, drastically reducing diagnostic time.
• Complete Diagnostic Kit - Includes both the PP3EZ Power Probe for activating and testing circuits and the ECT3000 Circuit Tracer for fault finding in hard to reach wiring, providing a comprehensive all in one testing solution.
• Activate Components with Power or Ground - apply power or ground directly to components, enabling instant functional checks without back probing or jumper wires.
• Includes Tip Adapters - two essential adapters for current measurement (PPAMP) and PWM signal testing (PPPWM), expanding diagnostic capability for modern automotive systems.
   

Professional quality multimeter with oscilloscope functions

Fast A/D converting sampling time, built in data logging, and trend capture.

Bluetooth enabled, with App.

IP67 rated.

• 20MHz / 50MS/s bandwidth / real time sampling rate
• 320 x 240 px TFT colour LCD display
• CATIII 1000V / CATIV 600V
• Rechargeable battery

Next generation multimeter. Auto / manual ranging. Push button function selection. Highly accurate 9999 counts triple display. Non contact voltage. Backlight

A superb unit!

Great value auto ranging True RMS multimeter. Highly accurate, easy to use. 6,000 counts display. Measures current up to 10A.

• Includes temperature probe
• 2x AAA batteries included

Next gen technology! Use App to REMOTELY CONTROL multimeter, log data, graph live data etc. Ideal for hazardous environments, remote measurement (eg trucks) etc. 1000V CAT III.

• Battery included

Download the App on the App store for iPhones

Download the Apk for Android Phones

Next generation multimeter with rotary dial.

Two LED lights - for illumination, plus continuity.

• 9000 counts
• Triple function display
• Non contact voltage

Auto/manual ranging DMM with inductive pick up & K type temperature probe. RPM measurement, millisecond pulse duty cycle, dwell angle. Data hold & relative functions.

Supplied in a sturdy plastic case.

• IP67 dust and waterproof
• Fused current inputs and overload protection
• High contrast 4000 counts display with backlight
• 9V battery included
• Automotive functions, with BONUS premium quality Silvertronic leads ET9408