Hand Tools

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

• Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
• Durable Construction: Built with high-quality materials to ensure long-lasting performance.
• User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
• Not for use with impact / pneumatic tools.

A handy socket which is designed to be used on thread taps from M4 through M14. Versatile design also allows it to be used with reamers / screw extractors with square shanks from 5mm - 8mm across the flats.

• Stepped chuck collet design for use with a wide range of square shanks.
• Suits M4 - M14 square taps
• 3/8" Sq Drv

This kit contains three magnetic metric sized nutsetters which are ideal for use with cordless drivers to fasten / remove common sizes of hose clamps.

• 7mm | 8mm | 10mm
• 55mm overall length
• 1/4" hex drive
• Magnetised

This magnetised bit holder holds standard 1/4" hex insert bits. Features a soft grip rubber handle for comfortable use.

• Holds 1/4" hex drive insert bits
• Blade length: 100mm | Overall length: 205mm

Professional quality breaker bar with ratcheting head. The ratcheting head has a three way mechanism - lock / right / left, and is rated to a maximum torque of 1,000Nm.

Made from heat treated drop forged CrV steel with a mirror chrome finish.

• 24" / 600mm long
• 1/2" Sq Drv

• 38mm maximum opening
• 12" overall length

Ampco has been producing non-sparking / non-magnetic / corrosion resistant tools since 1922. Made in the US, Ampco products are designed for professional use.

• 7/8" (22mm) tip diameter
• 7-3/4" (200mm) overall length

Snap lock rings have a wide range of automotive uses, such as on brakes, transmissions, machine tools etc. But are incredibly difficult to remove / install without specalised pliers. These pliers are designed with deep serrations on the outside of the jaws to hold lock rings securely, allowing for them to be easily spread.

• Angle tip pliers
• Jaw opening: 4 - 20mm | Jaw width: 6.5mm
• 215mm overall length

• Female Hex Size: 1/4"
• Overall Length: 8-1/2" (216mm)
• Blade Projection: 4-3/8" (111mm)

Aviation tin snips with drop forged, tempered steel blades with serrated jaws. These tin snips are self opening, with spring action handles and safety catch. Handles feature contoured grips.

• Left cut
• Finger stop tabs to prevent slippage
• 0-8.5mm Jaw opening
• 25mm Jaw width
• 250mm overall length

Aviation tin snips with drop forged, tempered steel blades with serrated jaws. These tin snips are self opening, with spring action handles and safety catch. Handles feature contoured grips.

• Straight cut
• Finger stop tabs to prevent slippage
• 0-8.5mm Jaw opening
• 25mm Jaw width
• 250mm overall length

Aviation tin snips with drop forged, tempered steel blades with serrated jaws. These tin snips are self opening, with spring action handles and safety catch. Handles feature contoured grips.

• Right cut
• Finger stop tabs to prevent slippage
• 0-8.5mm Jaw opening
• 25mm Jaw width
• 250mm overall length

Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.

• 1.5mm ball hex
• 95mm blade length

Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.

• 2.5mm ball hex
• 1100mm blade length

Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.

• 3.0mm ball hex
• 115mm blade length

Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.

• 4.0mm ball hex
• 130mm blade length

Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.

• 5.0mm ball hex
• 140mm blade length

Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.

• 6.0mm ball hex
• 150mm blade length

Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.

• 8.0mm ball hex
• 180mm blade length

Sunflag ball end hex drivers are precision made in Japan, for professional use. Ball hex drivers allow screws to be driven at an angle.

• 2.0mm ball hex
• 100mm blade length

16 pc Long Series Ball-Hex-L Key Set with Metal Box. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, 3/8 , 1/2 , 9/16, & 5/8

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• The Metal Box folds open to serve as a stand and has a place for every key. It includes holes for convenient hanging on a pegboard.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

12 pce Long Series Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , & 5/16

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

13 pc Long Series Ball-Hex-L Key Set with Metal Box. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• The Metal Box folds open to serve as a stand and has a place for every key. It includes holes for convenient hanging on a pegboard.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 105 - 150mm capacity
• 5/8" x 11 TPI thread
• 260mm bolt length

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 30 - 50mm capacity
• 3/8-16 UNC thread

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 50 - 75mm capacity
• 3/8" thread

Made from drop forged alloy steel, hardened and chrome plated. Sharp edges for easy placement behind the part

• 75 - 105mm capacity
• 1/2" thread
• 200mm bolt length

For use with ET0711 kit. When used with a 3 jaw puller, provides equal pulling force distributed at 3 supporting joints.

• Spread: 50 - 105mm

A bench mounted double flaring kit for automotive type double flares on fuel / brake lines. Fast operation and minimal material wastage.

• 3/16" / 4.75mm & 1/4" / 6mm SAE and DIN dies for most popular flares on steel, aluminium or copper pipes.
• Cam action body fits into bench vices.

• 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1-1/16", 1-1/8", 1-1/4"
• 1/2" Sq Drv deep sockets
• Chrome Moly impact grade

• 10mm - 19mm, 21mm, 22mm, 24mm, 27mm, 30mm, 32mm
• 1/2" Sq Drv
• Deep sockets
• Chrome Moly impact grade

• 7mm - 19mm
• 3/8" Sq Drv
• Short & deep
• Chrome Moly

For new generation COMPACT impact wrenches.

All ESSENTIAL sizes, especially 15mm for Commodore harmonic balancers.

• 6 Point
• Chrome moly impact sockets
• Sizes: 13mm - 19mm, 21mm, 22mm, 24mm
• 1/2" Sq Drv