Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks. Simply pressurise using shop air.

The maximum pressure in most turbo systems is approximately 15 PSI - 25 PSI. When connecting the airline to these test caps, always regulate air pressure in the test to 25 PSI maximum. Over pressurisation will damage system components.

A graduated approach to leak testing is recommended. Start with 5 PSI to find large leaks, and progressively increase in 5 PSI increments.

• Kit includes 4 pairs of stepped adaptors to fit most sizes found on passenger vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 35-90mm

All-in-one driver box to test all petrol injectors including the latest GDI Piezo injectors. Plus diesel injectors.

Ideal for bench testing injectors to see if they are opening correctly. Also use in conjunction with ultrasonic cleaners to better clean internal parts, or with injector nozzle tester to test spray pattern.

• Automatically detects injector type
• From 1Hz to 20Hz adjustable
• Supplied with 6 adaptors to connect to a fuel rail of a traditional petrol PFI injector tester
• Signal output cords for both petrol / diesel injectors
• Powered by 240V adaptor (not shown)

12 pce Long Series Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , & 5/16

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

16 pc Long Series Ball-Hex-L Key Set with Metal Box. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, 3/8 , 1/2 , 9/16, & 5/8

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• The Metal Box folds open to serve as a stand and has a place for every key. It includes holes for convenient hanging on a pegboard.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

9 pc Extra Long Series Double-Ball-Hex-L Key Set with Holder. MM Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Eklind STUBBY WITH BALL HEX TIP short arm facilitates access in tight spaces.
• Color coded BLUE for METRIC.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

13 pc Extra Long Series Double-Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8

• Made in U.S.A.
• High quality, Industrial grade, Professional tools.
• Made with Eklind Alloy Steel.
• Eklind Ball-Hex keys will drive a fastener at up to a 30 degree angle.
• Eklind STUBBY WITH BALL HEX TIP short arm facilitates access in tight spaces.
• Colour coded RED for INCH.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

13 pc Long Series Bright-Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind BRIGHT Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

22 pc Combination Ball-Hex-L Key Set, includes the following 2 sets: #13609: 9 pc Long Series Ball-Hex-L Key Set with Holder. MM Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10 #13213: 13 pc Long Series Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• Color coded BLUE for METRIC.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.