Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.

• Long length swivel jaws provide access to deep seated / hard to reach connectors
• Applications include Fiat | Mercedes | VAG

Remove guesswork from modern vehicle diagnostics by putting every OBDII circuit at your fingertips. This professional breakout box gives technicians instant access to every OBDII circuit for faster fault finding, ECU testing, and network diagnostics. Whether you're diagnosing communication faults, testing CAN bus systems, performing ECU bench testing, or verifying vehicle power and ground circuits, the ET3142 provides the visibility and control that standard scan tools simply can't offer.

Featuring a built-in LCD display with real-time True RMS voltage monitoring across all 16 OBD-II pins, the ET3142 allows technicians to instantly identify power supply issues, ground faults, CAN communication activity, and wiring problems without repeatedly probing connectors. Dynamic signal detection, audible voltage alarms, and ground status indicators help reduce diagnostic time and improve accuracy.

The integrated 120 CAN termination switches make the ET3142 an invaluable tool for ECU bench testing and module diagnostics. By providing proper CAN network termination, technicians can test modules off the vehicle with improved signal integrity and confidence. Compatible with both 12V and 24V systems, it is suitable for passenger vehicles, trucks, buses, and commercial equipment.

• Real Time VRMS Voltage Monitoring - displays real time True RMS voltage on all 16 OBDII pins
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

12 pce Long Series Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , & 5/16

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

13 pc Long Series Ball-Hex-L Key Set with Metal Box. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• The Metal Box folds open to serve as a stand and has a place for every key. It includes holes for convenient hanging on a pegboard.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

9 pc Extra Long Series Double-Ball-Hex-L Key Set with Holder. MM Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Eklind STUBBY WITH BALL HEX TIP short arm facilitates access in tight spaces.
• Color coded BLUE for METRIC.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

13 pc Extra Long Series Double-Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8

• Made in U.S.A.
• High quality, Industrial grade, Professional tools.
• Made with Eklind Alloy Steel.
• Eklind Ball-Hex keys will drive a fastener at up to a 30 degree angle.
• Eklind STUBBY WITH BALL HEX TIP short arm facilitates access in tight spaces.
• Colour coded RED for INCH.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

13 pc Long Series Bright-Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind BRIGHT Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.

22 pc Combination Ball-Hex-L Key Set, includes the following 2 sets: #13609: 9 pc Long Series Ball-Hex-L Key Set with Holder. MM Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10 #13213: 13 pc Long Series Ball-Hex-L Key Set with Holder. Inch Sizes: .050, 1/16, 5/64, 3/32, 7/64, 1/8 , 9/64, 5/32, 3/16, 7/32, 1/4 , 5/16, & 3/8

• Made in U.S.A.
• High Quality, Industrial Grade, Professional Tools.
• Made with Eklind Alloy Steel.
• Heat Treated for optimum strength and ductility.
• Finished with Eklind Black Finish to resist rust.
• Eklind Ball-Hex Keys will drive a fastener at up to a 30 degree angle.
• Color coded RED for INCH.
• Color coded BLUE for METRIC.
• Plastic holder firmly retains each key in a size marked hole.
• Meets or exceeds all applicable standards and regulations set forth in ANSI, ASME, RoHS, REACH, CA prop 65 and Dodd-Frank Conflict Minerals legislation.