Tyre Inflation

Professional quality. Hand trigger inflate / thumb operated deflate, for fast operation. Highly accurate. Individual calibration certificate.

• Inflates up to 170 psi
• Easy to read backlit display
• Extra long 1.8m hose

The legendary driveway tyre inflator made in the UK for Australian conditions.

Repair kit available 124MK3-RK.

• 0 - 138 PSI

The legendary driveway tyre inflator made in the UK for Australian conditions - is now also available in a digital model. This digital model is suitable for inflating truck tyres.

Repair kit available 124MK3-RK

Air Boy quality with premium German WIKA gauge / twin connector.

• Highly accurate ( /- 0.19 Bar)
• Handle operation eased by compressed air
• Air escape / deflation valve
• 50cm hose
• 0 - 174 PSI | 0 - 12 Bar

An ideal gauge for checking tyre pressure on passenger cars. Supplied in a protective case.

A professional quality unit which is calibrated to the ANSI B standard.

• 5-60 PSI (20-400kPa)
• Angled Chuck
• Deflate control
• High quality diaphragm type gauge

A simple to use digital tyre pressure gauge with LCD backlight for working in dark places. Dual power via lithium battery and solar panel.

• 5 - 150 PSI measuring range
• 0.1 PSI resolution
• Pressure units: Bar | PSI | kPA

The Sonsbeek bar style tyre inflator has an aluminium reader bar, making it ideal for inflating / deflating / measuring water filled tyres. These are commonly used on tractors / agricultural vehicles.

This inflator is designed for rugged use, and has a pressed steel lever, as well as a rubber grip on the dual angle hold on chuck.

• 10 - 120 PSI measurement range
• 1/4" BSP female connector
• Dual angle hold on chuck

• Clip On chuck
• 0 - 160 PSI measurement range
• 1/4" NPT female inlet

The Sonsbeek car tyre inflator is a professional quality unit designed for inflating / deflating / measuring car tyres. One button operation, with rubber impact protector on the gauge. Ideal for tyre fitters / general trade use.

• Clip On chuck
• 0 - 60PSI measurement range. Optimal reading at 30 PSI
• 1/4" NPT female inlet

Supply Pressure: Maximum 13.8 BAR, Minimum 6.9 BAR, Recommended clean filtered air

Body Construction: Die cast aluminium with steel operating lever and impact absorbing bumper

Pressure Range: 0-9.6 BAR (0-138lbf/in2) standard

Gauge: Linear with magnifying window

• Inlet size: 1/4" BSP
• Measurement range: 0 - 160 PSI

The Sonsbeek truck tyre inflator is designed to reliably inflate truck tyres up to 220 PSI. The inflator has a large 90mm dial gauge for easy reading. The unit is designed for inflation, deflation and measurement.

The inflator is designed for rugged applications, and is supplied with a rubber impact protector on the gauge, rubber grip on the chuck, and a pressed steel lever.

One button operation

• 90mm dial for easy reading
• 220 PSI scale
• 1m hose length
• Rubber gauge protector

Sonsbeek truck tyre gauge. Double head angle chuck with inflate / deflate control.

• Dual hold on chuck
• 0 - 160 PSI

• 0-25mm | resolution 0.01mm / 0.0005"
• Zero setting at any position
• Buttons: zero, power, inch/mm