• 3:1 Shrink ratio
• Butt connectors
• Ring / spade terminal
• Male / female disconnector

A genuine Sunglag - made in Japan - automatic centre punch. Tool strikes a blow when pressure applied. Cap adjusts force of blow.

Simply adjust to desired spring tension. Then press firmly to generate an automatic centre punch. No hammer required for operation.

• Replacement tip available (AP-6).

The Sonsbeek car tyre inflator is a professional quality unit designed for inflating / deflating / measuring car tyres. One button operation, with rubber impact protector on the gauge. Ideal for tyre fitters / general trade use.

• Clip On chuck
• 0 - 60PSI measurement range. Optimal reading at 30 PSI
• 1/4" BSP female inlet
• 482mm hose length

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

Apply voltage from the Power Probe tip to quickly actuate components.

• Test circuits for voltage, continuity or polarity. Green / red LEDs provide quick confirmation.
• 6m heavy duty extension lead.

PPDRAW + PPFUSE Combo Pack - Diagnose Smarter, Save More Take full control of automotive diagnostics with this powerful pairing. The PPDRAW Draw Monitor connects via OBDII to supply 12V power, monitor battery voltage, and detect leakage currentÑplus it backs up vehicle memory during battery replacement. Pair it with the PPFUSE Fuse Monitor to track down parasitic draws across circuits with real-time amp readings, no fuse removal required.

Together, they offer unmatched accuracy, convenience, and mobilityÑeverything you need to monitor, diagnose, and repair electrical issues fast. Save by bundling both tools and streamline your diagnostic game .

A professional quality tyre tread depth gauge with durable metal construction for reading the tyre depth.

This product uses button batteries. Please note that the battery enclosure is designed to be securely fastened, using screws, and will require a screwdriver (not supplied) to access.

• 0-25mm | resolution 0.01mm / 0.0005"
• Zero setting at any position
• Buttons: zero, power, inch/mm

A professional quality tyre tread depth gauge with durable metal construction for reading the tyre depth.

This product uses a rechargeable lithium battery, for easy operation. A safer option to the standard model with button batteries.

• Easy USB charging / no button battery
• 0-25mm measurement
• Resolution: 0.01mm

Sonsbeek truck tyre gauge. Double head angle chuck with inflate / deflate control.

• Dual hold on chuck
• Robust diaphragm type gauge
• Rubber protector on gauge
• 0 - 160 PSI
• Accuracy: ± 2 psi @ 25 - 75 psi