A/C & Fuel Line Disconnect Set

A/C & Fuel Line Disconnect Set

For press type disconnection clips on Chrysler, Ford, Holden etc.

  • Fuel line: 5/16” & 3/8”
  • Air con: 3/8” | 1/2" | 5/8 ” | 3/4"

A/C Clutch Hub Puller Kit

A/C Clutch Hub Puller Kit

This kit contains a wide range of air conditioning clutch hub pullers / installers for Ford, Holden, Chrysler and a range of other vehicles.

Included in this kit are forcing screws, removing flange, and adaptor assembly to install / remove most clutch hubs.

  • Applications: Holden-Harrison DA-6, HR-6 and V5, A-6 and early R4 | Nippon Denso Ford / Chrysler A590, C171 & FS-6 | New Style, Sanden, York / Tecumesh HR980 | Zetex / Mitsubishi CH Series

A/C Compressor Belt Installer

A/C Compressor Belt Installer

Essential tool for A/C belt installation on Mazda 3 / Mazda 6 / Ford Focus.

A/C Compressor Seal & Bearing Service Kit

A/C Compressor Seal & Bearing Service Kit

A comprehensive kit for replacing air conditioning seals, clutches and clutch bearings. This kit suits Diesek Kiki (Zexel) | Hitachi | Mitsubishi | Nippondenso | Seiko-Seiki | Sanden.

Air Boy Air Conditioner Cleaning Gun Air Boy Air Conditioner Cleaning Gun

Air Boy Air Conditioner Cleaning Gun

A specialised cleaning gun for helping to remove bacteria from the air conditioning system. The gun injects cleaning fluid directly into the air conditioner evaporator.

The cleaning detergent leaves a protective layer in the air conditioning system that keeps it clean and at the same time secures a clean odour in the car. As quality and functionality always matters to Air Boy, our AC Cleaner is both easy to use and produced in impact-resistant quality materials that makes the tool very long lasting.

  • Remove bacteria / odours
  • Cleaning fluid available separately (SKU# AC-1L)

Ford A/C Compressor Stretch Belt Tool

Ford A/C Compressor Stretch Belt Tool

Specialised tool for removing / installing the inner belt (on engines with two belts).

  • Suits Ford Fiesta 1.6L (11-16)
  • Equivalent to Gates 91032

Mercedes A/C Low Side Coupler Removal

Mercedes A/C Low Side Coupler Removal

A specialised tool for removing the A/C low side coupler on Mercedes vehicles.

  • Applications: W204 | W211 | W219 | W221

Mercedes Air Conditioning Pulley Holding Tool

Mercedes Air Conditioning Pulley Holding Tool

A specialised counter holding tool for fixing / unfastening the belt pulley on the air conditioning compressor.

  • Applications: M112 | M113 | M272 | M273
  • Use a 7mm hex socket when working on M272 engines.

Nissan Air Intake Socket

Nissan Air Intake Socket

A special doubled ended socket for tri-point headed air intake hose clamps fitted to the Nissan Micra, and other Mercedes | Renault vehicles.

  • Double ended 3 point hose clip socket
  • For clamp sizes 30-45mm | 60-80mm
  • 11mm hex drv

Plastic Pick & Hook

Plastic Pick & Hook

Plastic construction to avoid damaging aluminium piping.

Subaru Air Con Stretch Belt Tool Subaru Air Con Stretch Belt Tool

Subaru Air Con Stretch Belt Tool

A specialised fitment tool for stretch belts fitted to the air conditioning compressor systems on late model Subaru 2.5L engines.

  • Engine: 2.5L (EJ255 | EJ257)
  • Applications: Impreza | Forester | Legacy | Liberty | Outback (08-13)

Toyota A/C Disconnect Tools

Toyota A/C Disconnect Tools

These tools are specially designed for removing the spring lock coupling (high side) in Toyota air conditioning systems.

Two tools in the set for the different coupling sizes.

  • For post 2000 vehicles.
  • OEM Equiv:09870-00025

Toyota Spring Lock Install Tools

Toyota Spring Lock Install Tools

Specially designed tool for locking the spring lock couplings in Toyota air conditioning systems. Two tools in the set for the different sized couplings.

  • Application: Toyota models after 2000

VAG A/C Coupling Release Tool

VAG A/C Coupling Release Tool

Air conditioning coupling release tools for VAG vehicles including Audi A4 / A5 (07-11).

  • Closed dimension 16 / 18mm
  • OEM Equiv: T40149
  • 2 pce set