Subaru Air Con Stretch Belt Tool

SKU: ET1737A


A specialised fitment tool for stretch belts fitted to the air conditioning compressor systems on late model Subaru 2.5L engines.

  • Engine: 2.5L (EJ255 | EJ257)
  • Applications: Impreza | Forester | Legacy | Liberty | Outback (08-13)

Engine Code(s)

EJ255, EJ257

Vehicle Make Model Series Engine Code Engine Size Year Start Year End
Barcode # 9321280399624
Brand Automotive
Product weight 0.1040kg
Shipping weight 0.130000kg
Vehicle Make Subaru

12 Months

Others also bought

Digital Tachometer

Digital Tachometer

This digital tachometer provides fast and accurate - contact and non contact - RPM and surface speed measurement of rotating objects.

This tachometer features a wide measurement range (from a very low RPM) and high resolution.

  • Range: 2~99,999 rpm (non-contact)
  • Range: 2~20,000 rpm (contact)
  • Detecting distance: 50mm - 500mm
  • Accuracy: +/- 0.05% 1 digits
  • Min / Max & calibration function
  • Auto Power Off
  • 9V battery included

Nissan Air Intake Socket

Nissan Air Intake Socket

A special doubled ended socket for tri-point headed air intake hose clamps fitted to the Nissan Micra, and other Mercedes | Renault vehicles.

  • Double ended 3 point hose clip socket
  • For clamp sizes 30-45mm | 60-80mm
  • 11mm hex drv

More from this category

A/C & Fuel Line Disconnect Set

A/C & Fuel Line Disconnect Set

For press type disconnection clips on Chrysler, Ford, Holden etc.

  • Fuel line: 5/16” & 3/8”
  • Air con: 3/8” | 1/2" | 5/8 ” | 3/4"

A/C Clutch Holding Tool

A/C Clutch Holding Tool

This three-stud wrench keeps the A/C clutch from turning when loosening or tightening the retaining nuts. Adjusts quickly with brass thumbscrews to fit various styles of A/C compressors used on Holden, Ford, & Chrysler vehicles. It also fits a variety of other pulleys.

A/C Clutch Hub Puller Kit

A/C Clutch Hub Puller Kit

This kit contains a wide range of air conditioning clutch hub pullers / installers for Ford, Holden, Chrysler and a range of other vehicles.

Included in this kit are forcing screws, removing flange, and adaptor assembly to install / remove most clutch hubs.

  • Applications: Holden-Harrison DA-6, HR-6 and V5, A-6 and early R4 | Nippon Denso Ford / Chrysler A590, C171 & FS-6 | New Style, Sanden, York / Tecumesh HR980 | Zetex / Mitsubishi CH Series

A/C Compressor Belt Installer

A/C Compressor Belt Installer

Essential tool for A/C belt installation on Mazda 3 / Mazda 6 / Ford Focus.

A/C Compressor Seal & Bearing Service Kit

A/C Compressor Seal & Bearing Service Kit

A comprehensive kit for replacing air conditioning seals, clutches and clutch bearings. This kit suits Diesek Kiki (Zexel) | Hitachi | Mitsubishi | Nippondenso | Seiko-Seiki | Sanden.

Air Boy Air Conditioner Cleaning Gun Air Boy Air Conditioner Cleaning Gun

Air Boy Air Conditioner Cleaning Gun

A specialised cleaning gun for helping to remove bacteria from the air conditioning system. The gun injects cleaning fluid directly into the air conditioner evaporator.

The cleaning detergent leaves a protective layer in the air conditioning system that keeps it clean and at the same time secures a clean odour in the car. As quality and functionality always matters to Air Boy, our AC Cleaner is both easy to use and produced in impact-resistant quality materials that makes the tool very long lasting.

  • Remove bacteria / odours
  • Cleaning fluid available separately (SKU# AC-1L)