Next gen technology! Use App to REMOTELY CONTROL multimeter, log data, graph live data etc. Ideal for hazardous environments, remote measurement (eg trucks) etc. 1000V CAT III.

• Battery included

Download the App on the App store for iPhones

Download the Apk for Android Phones

A versatile heavy duty long handled riveter, suitable for alloy and stainless steel rivets - blind rivets / female nutcerts / male nutcerts.

• Stainless Rivets: To 6.4mm
• Nutcerts: To 12mm
• RivBolts: To 8mm

Updated model with extra plate to fit virtually all passenger / commercial vehicles. Ratcheting handle with reversing switch makes it convenient to use in any position, and also centrally distributes force to prevent piston misalignment.

• Works on most single / multi piston calipers.
• Size range: 1-9/16" - 2-5/8"
• Includes magnetic 7" extended adaptor plates to suit multi piston calipers on heavy duty vehicles.

The Power Probe Temperature Kit is designed to give readings for ambient temperature and from the wireless Temperature Probe.

The Tempkit has a built-in temperature sensor in the base unit, plus a temperature sensor in the remote wireless Probe. This allows for multiple readings simultaneously.

One additional wireless Temperature Probe (TEMPPROBE) is available separately, for a second temperature reading.

• Measuring Range: -22°C to 70°C
• Wireless Transmitter Distance: 5m (16.5 Feet)
• Accuracy ±2.0°F(±2.0°C)
• Backlit LCD Display
• Requires 2x AA and 2x AAA Batteries (NOT INCLUDED)

Convert your Android scan tool into a professional battery tester! Or use with your mobile phone / tablet. Easily send test reports by email.

• Works with all common automotive batteries including AGM / GEL / Lithium.
• Professional tester showing battery status, charging / cranking tests, and voltage monitoring for deep analysis.

Adjustable jaw design makes these pliers ideal for removing quick connnect, snap and side & lock couplers, on a wide range of vehicles.

• Applications include: Alfa, Audi, BMW, Chrysler, Citroen, Fiat, GM, Lancia, Lexus, Mercedes, Opel, Peugeot, Renault, SEAT, Skoda, Toyota, VW etc

Don't try removing fuel lines without this tool! Specially designed to make it quick and easy to disconnect the high pressure fuel line, which is near the firewall.

• Engines: BMW Mini N13 / N18
• Applications: BMW / Mini 1 & 3 series F20 / F30
• OEM equiv: 8330496242

Quickly / safely disconnect the higher pressure fuel line from the mechanical high pressure fuel pump on selected BMW Mini turbo engines from 2007 - 2013.

Please note that if the release tabs have been damaged, this tool cannot be used, and the fuel line may need to be replaced. In addition, on some engines it may be necessary to first remove the 14mm flare nut on the fuel feed line. Please see attached PDS.

• Engines: BMW Mini N14 | N18
• OEM equiv: 130250

Special kit for inline connection into low pressure fuel delivery systems, for bleeding / priming.

• Six connectors: Holden | Renault | Fiat | Ford | PSA (8mm & 10mm)
• Clear pipes allow air bubbles to be seen

Disconnects stubborn heater hose fittings on 2.0L EcoBoost engines in Focus (12-16) | Escape | Kuga (13-16). Fittings are close to firewall behind the engine, and hard to remove without this tool.

• Made from heavy duty nylon

A time saving tool for disconnecting fuel lines on Ford vehicles that use metal push fit type connectors. These connectors require collets from this tool to push up inside the connector, to allow separation (rather than using buttons).

• Suitable for use on many Ford EFI / direct injection petrol / TDCI diesel engines
• Engines: 1.0L Duratec (GDi) | 1.0L EcoBoost | 1.5L EcoBoost | 1.8L & 2.0L Duratec-HE | 2.0L TDCI (DW10F)
• Sizes: 5/16" (8mm) | 3/8" (10mm)
• OEM Equiv: 310-317 | CH-50637