A time saving tool for disconnecting fuel lines on Ford vehicles that use metal push fit type connectors. These connectors require collets from this tool to push up inside the connector, to allow separation (rather than using buttons).
- Suitable for use on many Ford EFI / direct injection petrol / TDCI diesel engines
- Engines: 1.0L Duratec (GDi) | 1.0L EcoBoost | 1.5L EcoBoost | 1.8L & 2.0L Duratec-HE | 2.0L TDCI (DW10F)
- Sizes: 5/16" (8mm) | 3/8" (10mm)
- OEM Equiv: 310-317 | CH-50637
310-137
| SKU | ET9540 |
| Barcode # | 9321280420946 |
| Brand | Automotive |
12 Months
Others also bought
Holden Fuel Tank Locking Ring Tool
A specialised fuel tank sender locking ring tool for Holden vehicles, as well as some SAAB vehicles.
Approximately 140mm high (from the base for the two angled arms to the top). Each arm approximately 75mm long.
- Astra-G (98-12) | Astra-H (04-12) & SAAB 9-3 (03-11)
- B207 | B284L | Z19DT | Z19DTH | Z19DTR
- 1/2" Sq Drv
- OEM Equiv: KM-797
Fuel Tank Locking Ring Tool
A specialised fuel tank sender wrench for Kia vehicles. This wrench is also suitable for various BMW / Mercedes / Volvo diesel & petrol engines.
- Applications: Holden Astra J (2010>), Mercedes W204 | W212, BMW F01 | F02 | F10 | F12, Volvo T4 / T5 (2010>) | S40 | V40
- Hyundai | Kia: suits lock rings 31152 A9000 | 31152 J9000 | 31552 0W000.
- Approx dimensions - 180mm (bottom tab to top tab) | 80mm (PCD of two top tabs)
- 1/2" Sq Drv
More from this category
A/C & Fuel Line Disconnect Set (2 Pce)
For press type disconnection clips on Chrysler, Ford, Holden etc.
- Fuel line: 5/16” & 3/8”
- Air con: 3/8” | 1/2" | 5/8 ” | 3/4"
Adjustable Jaw Fuel Line Pliers
Adjustable jaw design makes these pliers ideal for removing quick connnect, snap / side lock couplers on a wide range of vehicles.
BMW Mini High Pressure Fuel Line Disconnect Tool
Don't try removing fuel lines without this tool! Specially designed to make it quick and easy to disconnect the high pressure fuel line, which is near the firewall.
- Engines: BMW Mini N13 / N18
- Applications: BMW / Mini 1 & 3 series F20 / F30
- OEM equiv: 8330496242
BMW Mini N14 | N18 Fuel Line Disconnect Tool
Quickly / safely disconnect the higher pressure fuel line from the mechanical high pressure fuel pump on selected BMW Mini turbo engines from 2007 - 2013.
Please note that if the release tabs have been damaged, this tool cannot be used, and the fuel line may need to be replaced. In addition, on some engines it may be necessary to first remove the 14mm flare nut on the fuel feed line. Please see attached PDS.
- Engines: BMW Mini N14 | N18
- OEM equiv: 130250
Diesel Priming Kit
Special kit for inline connection into low pressure fuel delivery systems, for bleeding / priming.
- Six connectors: Holden | Renault | Fiat | Ford | PSA (8mm & 10mm)
- Clear pipes allow air bubbles to be seen
Ford 2.0L EcoBoost Heater Hose Disconnect Tool
Disconnects stubborn heater hose fittings on 2.0L EcoBoost engines in Focus (12-16) | Escape | Kuga (13-16). Fittings are close to firewall behind the engine, and hard to remove without this tool.
- Made from heavy duty nylon