Airline Fittings

Air Boy air breathing adaptors are made with an optimised safety system that prevents unintended release. They are made in strong and impact resistant materials that together with their safety design ensure a long lasting, user friendly and safe fitting.

The Air Boy 580 series adaptors are compatible with EN 139 / EN 270 standards, and are interchangeable with Cejn 341 / 342 fittings.

Air Boy air breathing couplers are made with an optimised safety system that prevents unintended release. They are made in strong and impact resistant materials that together with their safety design ensure a long lasting, user friendly and safe fitting.

The Air Boy 580 series couplers are compatible with EN 139 / EN 270 standards, and are interchangeable with Cejn 341 / 342 fittings.

• Housing: Galvanised steel
• Seals: Nitrile rubber
• Springs: Stainless spring wire
• Valve: POM / Acetal
• Working pressure: 16 Bar
• Burst pressure: 150 Bar
• Temperature range: -20 degrees C to 60 degrees C
• Flow diameter: 7.8mm

TECHNICAL

The New range of SONSBEEK SAFETY ADAPTORS designed for the Australian Market.

These safety adaptors are fitted with a venting check so that when a hose is disconnected from its supply point, the pressurised air contained in the hose bore itself does not eject in a violent manor.

This greatly reduces any hose whip and reduces the extreme noise at disconnection.

ADVANTAGES

Increased safety standards in the workplace.

INTERCHANGEABILITY

Available in all common coupling interchanges used through out Australia.

INTERCHANGEABILITY

Available in all common coupling interchanges used through out Australia.

IMPROVED ACCIDENT PREVENTION

This safety adaptor dramatically reduces the vicious hose whip experienced at the disconnection of a pressurised air hose.

IMPROVED INDUSTRIAL SAFETY

The extreme noise level experienced at disconnection is greatly reduced

WORKING TEMPERATURE

-20°C up to +60°C

WORKING PRESSURE

Safe working up to 250 PSI

APPLICATIONS

Compressed air hoses.

CAUTION

Always check your fittings are securely fastened before use.

NICKEL PLATED HARDENED STEEL CONSTRUCTION



NOTE

Purging times vary in relation to pressure and hose length


KEEP CLEAN

TECHNICAL

For modern day compressed air couplings, HIGH VOLUME is essential. 

 The new 2007 release GENUINE SONSBEEK 525 Series Couplings have been designed for the Industrial market.

 Quality and performance. 

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

CEJN 320, RECTUS 25 & 26

RYCO 500, JP EURO 59 series, RECTUS 26KE

 WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

 OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

APPLICATIONS

Compressed air and pneumatic applications, especially suitable where high flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 525 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

TECHNICAL

For modern day compressed air couplings, HIGH VOLUME is essential. 

 GENUINE SONSBEEK 525 Series Couplings have been designed for the Industrial market.

 Quality and performance. 

 Precision manufactured components.

Thread sealant applied to all male threads.

Anti corrosive silver Nickel plated.

INTERCHANGEABILITY

CEJN 320, RECTUS 25 & 26

RYCO 500, JP EURO 59 series, RECTUS 26KE

ADVANTAGES

One Touch AUTOMATIC Operation means no need to pull back the sleeve to connect. This clever one touch design incorporates a valve design that offers high flow rates at more than 60CFM .

 WORKING TEMPERATURE

-10°C up to +80°C—Buna N Seal

 OPERATING PRESSURE

Safe working pressure to 250 PSI / 17 BAR

MAINTENANCE

Lubricate occasionally.

 Not recommended for Dry air applications Refer to the Air breathing section

 Do not connect directly to “Impacting” Air Tools Always use a impact absorbing leader hose

APPLICATIONS

Compressed air and pneumatic applications, especially suitable where high flow rates are required.

SPECIAL PRODUCT:

Being one of our most popular ranges it has been imperative to introduce a 525 series SAFETY ADAPTOR to avoid hose whip and reduce noise at disconnection. 

 ASK US FOR MORE DETAILS

BACK BODY     CASE HARDENED STEEL

VALVE BODY    CASE HARDENED STEEL

SLEEVE             CASE HARDENED STEEL

VALVE                           Brass

SPRING                       AISI 301

BALLS                         AISI 420

SEALS                          Buna N

Sonsbeek female hex sockets are precisely machined from long lasting brass. Available in a range of BSP thread sizes.

• Female hex sockets
• Made in Australia
• Brass

GBS bolt clamps in accordance with DIN 3017 are especially suitable for sealing suction and pressure hoses which have plastic or steel reinforcements and high shore hardness.

Benefits:

• Wide clamping range
• High clamping forces
• Several bandwidths
• Various materials
• Single and multipart design

These hex nipples are precision-engineered connectors designed for reliable performance in high pressure compressed air systems. Featuring solid brass construction, these nipples have a hexagonal body allowing for easy tightening, and are available in BSP threads.