Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• LED light indicates when external power source is active
• Fuse protects against current spikes

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings during battery disconnection / changeover. Simply connect the cable to vehicle's OBDII port, and other end to a 12V power source (using the alligator clips).

Always ensure that all vehicle electronics (such as air con, radio etc) are turned off prior to use to avoid blowing the fuse in the unit.

• 2.5m cable
• Alligator clips
• For 12V systems only

Replacement glass fuse for ET6788 memory saver cable.

• 4.5A fuse

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. 40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 240 x 140 x 100mm
• 120W ultrasonic power / 100W heating power
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

An essential set of popular sizes of brake caliper sockets used on Audi / VW / Porsche vehicles.

These sockets are specialised 7 Point & 10 Point sockets with a range of different diameters (which are measured from the inside rim of the sockets).

• 9mm | 10 Point - Audi Q7 / Touareg / Porsche
• 11.5mm | 10 Point - Porsche
• 14mm | 7 Point - Audi Q7
• 15mm | 10 Point - Audi Q7 / Porsche
• 20mm | 10 Point - Porsche Cayenne
• 22mm | 7 Point - Audi S5

An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.

• Aluminium body and brass tip to prevent damage to the lift support
• Magnet to hold the tool in place while securing the clamp
• For up to 13mm struts

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings during battery disconnection / changeover. Simply connect the cable to vehicle's OBDII port, and other end to a 12V power source (using the alligator clips).

Always ensure that all vehicle electronics (such as air con, radio etc) are turned off prior to use to avoid blowing the fuse in the unit.

• 2.5m cable
• Alligator clips
• For 12V systems only

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• LED light indicates when external power source is active
• Fuse protects against current spikes

PPDRAW + PPFUSE Combo Pack - Diagnose Smarter, Save More Take full control of automotive diagnostics with this powerful pairing. The PPDRAW Draw Monitor connects via OBDII to supply 12V power, monitor battery voltage, and detect leakage currentÑplus it backs up vehicle memory during battery replacement. Pair it with the PPFUSE Fuse Monitor to track down parasitic draws across circuits with real-time amp readings, no fuse removal required.

Together, they offer unmatched accuracy, convenience, and mobilityÑeverything you need to monitor, diagnose, and repair electrical issues fast. Save by bundling both tools and streamline your diagnostic game .

This product is designed for use in monitoring car battery voltage, leakage current, and serving as a backup power supply when replacing the battery. The product is connected to the car's OBDII interface via an OBDII connection cable to supply 12V power to the car and monitor the car system's leakage current for diagnosing various faults. It can also serve as a backup power supply for the car during battery replacement, preventing the car's mainboard from losing power and data. Draw Monitor can also monitor battery voltage through the OBDII port. Please read the instruction manual carefully before using the product.

• Supplies up to 10 amps
• Connects via OBDII
• View and record data via Bluetooth on App
• USB-C rechargeable
• Adjustable current output alarm & adjustable auto power off setting
• Graphing mode
• Monitor function input: 0-30V
• Voltage display accuracy: 1%+5dig resolution 0.1V
• Current display accuracy: 3%+5dig resolution 1mA