The Power Probe Fuse Monitor is designed to locate / isolate which circuit parasitic draw lies by measuring current across fuses without removing them. The PPFUSE can be used on Maxi, Mini, & ATC fuses with a maximum Amp rating of 80A. The Fuse Monitor calculates amp draw based on fuse size in real time. The PPFUSE is USB-C rechargeable, comes with a belt clip, has replaceable tips, and a work light.

• Locate parasitic draw across fuses
• The top of the tool shows inactive, active, or open for quick fuse diagnosis
• Accurately measures current without removing the fuse
• Ability to read Maxi, Mini, & ATC fuses up to 80A
• Belt clip
• Flashlight
• Replaceable tips
• Pair with the PPDRAW monitor to quantify parasitic draw and use the fuse monitor to isolate the source
• USB-C rechargable (420mAh lithium battery)
• Live current reading display (A)
• Screen hold
• Screen brightness control
• Accuracy down to 1mA
• Magnetic backing
• Auto rotating screen
• Auto shut-off

Fast / accurate current measurement at the fusebox. Plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections.

• LCD display
• Hold / Peak functions (with bar graph) for detecting current surges.
• Range: 0 - 80A, 0 - 48V DC
• Accuracy: ±2%

Quick, reliable diagnosis for all spark ignition systems, including Coil On Plug (COP) and general distributor type SPW.

Induction technology requiring no hook ups / ground wires / special adaptors.

Diagnose misfires, starting issues, damaged spark plugs / wires. Measure cylinder speed, ignition voltage, ignition time etc.

• Spark voltage (0-50,000V)
• Spark burn time (0-10ms)
• 200 to 19,999 RPM

The Power Probe 4 Master Combo Kit combines the Power Probe 4, ECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities.

The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle. The ECT3000 will help you trace short and open circuits quickly and accurately.

An adaptor for measuring DC currents up to 20A (and as low as 1 milliamp). Displays current in realtime. This adaptor works with all Power Probe circuit testers!

• Measures up to 20A DC
• Measures as low as 1 milliamp
• Displays Min / Max
• Backlit LCD

This impact socket is part of Endeavour's specialty range of 1" Sq Drv 6 point thin wall impact sockets designed for truck servicing. Sizes cover an extensive range from 70mm through to 200mm.

• 115mm diameter
• 6 point
• 1" Sq Drv

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids
• Auto shut off function.

Fast / accurate current measurement at the fusebox. Plugs directly into the fuse box and can be used on mini, standard and maxi fuse connections.

• LCD display
• Hold / Peak functions (with bar graph) for detecting current surges.
• Range: 0 - 80A, 0 - 48V DC
• Accuracy: ±2%

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

A specialised socket for removing the mounting bolts on the axle of Mercedes Actros vehicles.

• Torx Plus EPL #32
• 50mm overall length
• Chrome Moly construction