The ET2031B Universal Line Kit is a versatile, multi function diagnostic set designed for fast, secure connection to vehicle wiring during general engine testing and circuit evaluation. It enables quick probing, signal access, and component activation across a wide range of automotive systems, making it an essential tool for efficient fault finding and reliable electrical diagnostics.
This kit comes with a bonus multimeter - offering a comprehensive diagnostic solution.- Dual-Function LED Testers - these two-way LED circuit testers allow for quick identification of power and ground signals, making fault-finding faster and more intuitive.
- Black & Red Multimeter Connector Leads - ensuring reliable connectivity for a wide range of diagnostic tasks.
- Round Terminal Adapters (Male & Female) to Banana Plug - male and female round terminal adapters connect seamlessly to standard banana plugs; ideal for interfacing with OEM wiring and connectors.
- Flat Blade Terminal Adapters (Male & Female) to Banana Plug - Includes flat blade terminal adapters for compatibility with common automotive spade connectors, improving versatility during testing.
- Variable Resistors with Banana Terminals - adjustable resistors allow technicians to simulate loads, test sensor circuits, and diagnose voltage dependent faults with confidence.
- Needle Style Piercing Probes - designed for clean, precise back-probing without damaging insulation; perfect for modern fine gauge wiring.
- Heavy Duty Alligator Clips - these rugged clips provide strong, secure connections to battery posts, chassis grounds, or test points, ensuring stable readings during diagnostic work.
1 To 1 Connector (Red)
This stacked banana plug extension cable is part of the ET2031B kit.
- Red
1 To 1 Connector (Black)
This stacked banana plug extension cable is part of the ET2031B kit.
- Black
Acicular Probe (Red)
A fine needle contact able to reach into small tight openings, and for piercing insulation without noticeably damaging outer insulation.
- Red
Acicular Probe (Black)
A fine needle contact able to reach into small tight openings, and for piercing insulation without noticeably damaging outer insulation.
SRS Airbag Connector
A specialised, high conductivity plug designed to restore or repair the electrical connections in your vehicle's Supplemental Restraint System (SRS). Engineered for maximum safety and precision, it provides a secure locking connection with airbag squibs.
- Always disconnect the vehicle's battery and allow the system to discharge (typically 5-10 minutes) before servicing any SRS components to prevent accidental deployment.
Potentionmeter (Variable Re
This resistance tester is a 5K Ohm potentiometer which can simulate resistance signals of the coolant temperature sensor, throttle valve sensor etc. Features adjustable resistance.
1 To 1 Connector (Red)
This stacked banana plug extension cable is part of the ET2031B kit.
- Red
1 To 1 Connector (Black)
This stacked banana plug extension cable is part of the ET2031B kit.
- Black
Acicular Probe (Red)
A fine needle contact able to reach into small tight openings, and for piercing insulation without noticeably damaging outer insulation.
- Red
Acicular Probe (Black)
A fine needle contact able to reach into small tight openings, and for piercing insulation without noticeably damaging outer insulation.
SRS Airbag Connector
A specialised, high conductivity plug designed to restore or repair the electrical connections in your vehicle's Supplemental Restraint System (SRS). Engineered for maximum safety and precision, it provides a secure locking connection with airbag squibs.
- Always disconnect the vehicle's battery and allow the system to discharge (typically 5-10 minutes) before servicing any SRS components to prevent accidental deployment.
Potentionmeter (Variable Re
This resistance tester is a 5K Ohm potentiometer which can simulate resistance signals of the coolant temperature sensor, throttle valve sensor etc. Features adjustable resistance.
| SKU | ET2031B |
| Barcode # | 9321280321601 |
| Brand | Automotive |
| Product weight | 2.9000kg |
| Shipping weight | 4.000000kg |
12 Months
Calculate Shipping
Flat Rate Shipping - $19.25
$19.25 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
Multimeter Lead Set (28 Pce
Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.
- Potentiometer (variable resister) (1x)
- Signal tester / LED stroboscope (2x)
- Piercing probes (green / yellow)
- Test probe extension (2x)
- SRS (airbag) connector (1x)
- Crocodile clip adaptors (2x)
- Needle probes (4x)
- DMM test leads (2x)
- Banana plug extensions (4x)
- Flat terminals (8x)
Silvertronic Multimeter Tes
A pair of double insulated silicone test leads one end terminating in a straight fixed shrouded plug, the other in a right angled plug, both compatible with standard 4mm instrument sockets.
- 1.2m length
- Made in UK quality
Silvertronic Multimeter Bac
Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.
- 4 colours | 0.7mm (0.028") OD back probe pins
- Made in UK quality
- 1000V CAT III 20A
Silvertronic Right Angle Back Probes (2 Pce)
These unique back probes enable measurement in confined areas. The attached lead with socket allows connection to any standard 4mm multimeter plug.
Silvertronic leads are premium quality, made in the UK, using double insulated silicone cables.
- 0.7mm OD back probe pins
- 300mm cable length
Silvertronic Back Probes |
Engineered for precision diagnostics and non-invasive electrical measurements, the Silvertronic ET9432 Back Probes are high-performance test accessories ideal for automotive, industrial, and electronic environments. This professional-grade set enhances versatility and safety when probing connectors, terminals, or insulated conductors.
- 1000V CAT III 20A
- 30 cm cable
- Made in UK
- Double insulated heat resistant silicone leads
Bluetooth Clamp Meter | Oscilloscope
Bluetooth Clamp Meter with Multimeter & Oscilloscope Functions
Connect up to three clamp meters to a single Bluetooth app! Ideal for diagnosing 3-phase EV motors. Offers advanced measurement capabilities with multimeter and oscilloscope functions, plus convenient data management features.
- Bluetooth Connectivity - Link up to 3 meters for simultaneous monitoring
- Rechargeable Battery - Long lasting power for field use
- 2.8" LCD Display - Clear, high resolution readout
- 38mm Jaw Opening - Suitable for large conductors
- Measurement Range:
- 1,000V AC/DC
- 1,000A AC/DC
- Resistance, Capacitance, Frequency, Duty Cycle
- Oscilloscope - 1 channel, 1kHz bandwidth, 5.0MSa/s sampling rate
- Data Features - Read offline recordings, view data charts, share recordings, and set threshold alarms for proactive diagnostics
More from this category
Multimeter Lead Set (28 Pce
Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.
- Potentiometer (variable resister) (1x)
- Signal tester / LED stroboscope (2x)
- Piercing probes (green / yellow)
- Test probe extension (2x)
- SRS (airbag) connector (1x)
- Crocodile clip adaptors (2x)
- Needle probes (4x)
- DMM test leads (2x)
- Banana plug extensions (4x)
- Flat terminals (8x)
Silvertronic Automotive Tes
The test lead of choice for professionals. Compatible with all standard multimeters. Made in UK quality.
- Red & black test leads - straight | right angled plugs
- Crocodile clips | cable piercers | back probes
Silvertronic Multi Pin Conn
The Silvertronic Multi-Pin Connector Kit is a professional-grade solution designed for safe, accurate testing of connector-terminated circuits, especially in aerospace, automotive, and industrial environments.
This kit enables technicians to access and test small or hard-to-reach pins without compromising safety. Simply select small screw in pins to access connectors when standard test lead tips are too big and bulky.
Supplied in a hard case or reusable wallet that indicates if any pins are missing.
- IEC 1010 Rating: Rated to 1000V CAT II (600V CAT III), with double/reinforced insulation and bi-color silicone cable design to alert users to potential shock hazards
- Red / Black Double Insulated Silicone Test Lead. Terminated one end in a Right Angled 4mm Plug compatible with all standard 4mm instrument sockets, the other end terminated in a unique 'screw in pin socket'
- 2 sets of 4 screw in pins; each pin has both a male and female contact.
- Green double insulated earth lead with detachable large green crocodile clip.
Kit components:
Silvertronic Non Intrusive
A professional quality back probe kit from Silvertronic designed for when cable piercing is either not practical or permitted.
Silvertronic leads are made from double insulated Silicone making them both highly flexible, and also highly durable.
- Red / black test leads-right angled plugs (125cm long)
- Back probes - small (0.7mmm OD)
- Back probes - right angled
Silvertronic Professional M
The Silvertronic Professional Multimeter Lead Kit is a premium-quality test lead set designed for use with standard digital and analogue multimeters. Featuring high-quality double-insulated silicone leads, this professional kit delivers exceptional flexibility, durability, and safety for technicians, electricians, automotive specialists, and electronics professionals.
Silvertronic's premium double-insulated silicone test leads are designed to meet IEC 61010 safety requirements and are rated to CAT III 1000V.
- Back probes
- Lantern probes
- Alligator clips
- 1.2m double insulated silicone leads
Silvertronics Avionic Test
A professional set of Avionic test leads featuring double insulated Silicone cables, with 250 copper stranding for high flexibility. Rated IEC 1010 1000V CAT III / 600V CAT IV 20 Amps.
- NSN 6625-01-618-9792