Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

Advanced detector using ultrasonic waves to detect leaks in a range of automotive / industrial applications. Tone generator to check for faulty seals in non pressurised enclosures.

• Detect vacuum / compressed air leaks (down to .13mm)
• Gas turbulence / with air / gas line blockages
• Electrical discharge due to insulation breakdown
• Mechanical wear in bearings, race assemblies etc
• Detect leaks in door seals, vehicle compartments etc

An adaptor for measuring DC currents up to 20A (and as low as 1 milliamp). Displays current in realtime. This adaptor works with all Power Probe circuit testers!

• Measures up to 20A DC
• Measures as low as 1 milliamp
• Displays Min / Max
• Backlit LCD

Bluetooth Clamp Meter with Multimeter & Oscilloscope Functions

Connect up to three clamp meters to a single Bluetooth app! Ideal for diagnosing 3-phase EV motors. Offers advanced measurement capabilities with multimeter and oscilloscope functions, plus convenient data management features.

• Bluetooth Connectivity - Link up to 3 meters for simultaneous monitoring
• Rechargeable Battery - Long lasting power for field use
• 2.8" LCD Display - Clear, high resolution readout
• 38mm Jaw Opening - Suitable for large conductors
• Measurement Range:
• 1,000V AC/DC
• 1,000A AC/DC
• Resistance, Capacitance, Frequency, Duty Cycle
• Oscilloscope - 1 channel, 1kHz bandwidth, 5.0MSa/s sampling rate
• Data Features - Read offline recordings, view data charts, share recordings, and set threshold alarms for proactive diagnostics

Advanced multi function tester supplied with interchangeable connectors. Voltage supply 8-30V.

A handheld diagnostic tool designed to test circuits / electrical connections.Operates from 3-48V. Includes probe adaptor for testing terminal connections.

An extension cable for the ET0700. Ideal for working on trucks / rear of vehicle.

The perfect electrical circuit test assistant! Get the job done with ease!

Compatible with standard 4 and 5 terminal relay circuits and can be used with most car makes and models. The RelaySim Pro can energise any relay that powers DC electric motors, fuel pumps, cooling fans, blower motors, window motors, and any other motor actuated by a relay), headlights, and other car lighting applications or almost all electrical actuators, such as electromagnetic, electromechanical, and electrohydraulic. Additionally, it can be used in series (in place of a fuse) with most other circuits rated for 25A or less. The device is suitable for both 12-volt and 24-volt systems and does not limit the operating current range. The operating range for continuous usage is up to 21 amps. The device supports a maximum surge of 27 amps, regardless of whether the voltage is 12V or 24V. Two LEDs (85 and 86 terminals) indicate voltage, polarity, and continuity in the relay coil circuit.

RelaySim Pro has a built-in dual high-definition LCD digital display that allows you to observe the current and voltage values in the circuit under test. The device measures the current flowing through the 87 or 87a circuit, depending on which one is currently activated. Also, it measures and displays voltage for circuits 85, 86, 87, 87a, and 30. You can directly observe the amperage and voltage going into an activated circuit, allowing you to assess the load's health. If an actuator is drawing more current than specified, or the current load is inconsistent during operation, the load/actuator is suspect and should be replaced.

• Suits 12V and 24V applications
• Separate control of the 87 and 87a relay circuit
• Integrated a dual high-definition LCD digital display
• Built-in DC ampere meter 0...50A
• Up to 21 amp operating current (for both 12V and 24V applications. See the specs for more details)
• Measurement of the current through the activated circuit
• Built-in DC voltage meter 0...199.9V
• Independent voltage measurement on each relay terminal
• Open load detection in OFF-state
• Flags a fail event (Status LED)

Check circuits on all 6V & 12V systems. 70mm insulated probe, with 3.6m retractable cord.

• 70mm insulated probe
• 3.6m retractable cord

This circuit tester is designed for sensitive circuits such as injector pulse, and automotive computer circuits.

Operates from 3-15V (for 6 - 12V systems). Handle glows red for positive polarity, and green for negative polarity. Supplied with 48" ground wire.

• 3 - 15V voltage range
• 75mm probe length