The ET2031B Universal Line Kit is a versatile, multi function diagnostic set designed for fast, secure connection to vehicle wiring during general engine testing and circuit evaluation. It enables quick probing, signal access, and component activation across a wide range of automotive systems, making it an essential tool for efficient fault finding and reliable electrical diagnostics.

This kit comes with a bonus multimeter - offering a comprehensive diagnostic solution.

• Dual-Function LED Testers - these two-way LED circuit testers allow for quick identification of power and ground signals, making fault-finding faster and more intuitive.
• Black & Red Multimeter Connector Leads - ensuring reliable connectivity for a wide range of diagnostic tasks.
• Round Terminal Adapters (Male & Female) to Banana Plug - male and female round terminal adapters connect seamlessly to standard banana plugs; ideal for interfacing with OEM wiring and connectors.
• Flat Blade Terminal Adapters (Male & Female) to Banana Plug - Includes flat blade terminal adapters for compatibility with common automotive spade connectors, improving versatility during testing.
• Variable Resistors with Banana Terminals - adjustable resistors allow technicians to simulate loads, test sensor circuits, and diagnose voltage dependent faults with confidence.
• Needle Style Piercing Probes - designed for clean, precise back-probing without damaging insulation; perfect for modern fine gauge wiring.
• Heavy Duty Alligator Clips - these rugged clips provide strong, secure connections to battery posts, chassis grounds, or test points, ensuring stable readings during diagnostic work.

Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

The test lead of choice for professionals. Compatible with all standard multimeters. Made in UK quality.

• Red & black test leads - straight | right angled plugs
• Crocodile clips | cable piercers | back probes

Industry leading live graphing on colour screen.

100kPa pressure range, with adaptor kit included.

Use with scan tool live data to compare with actual pressure readings.

An essential workshop tool.

• Inlet manifold pressure
• DPF pressure gradient
• Turbo output pressure

The DM300AUTO is much more than a complete True RMS Digital Multimeter. It also includes several other functions of great utility for professionals in the automotive sector, such as checking the status of fuse protection, providing out of spec reading alerts, detecting parasitic draw, guiding automotive tests, checking the correct charging process of the alternator and measuring possible cranking voltages in the supply circuit.

The TFT colour display and the user friendly menu make this instrument an indispensable tool for automotive professionals.

• Measures current Flowing through fuses without removing the fuse (up to 80A)
• Fuse Voltage drop testing
• Guided automotive test such as Cranking Voltage / Alternator Charging
• AC/DC Voltage measurements up to 1000V
• Current measurements up to 30A
• Measures resistance, continuity and diode testing
• Frequency and duty cycle for PWM signals

The ET3142 is a professional-grade breakout box designed for advanced in-vehicle diagnostics and bench-top ECU testing on both 12V and 24V systems. It exposes every OBDII pin for full signal access, monitors live circuit voltages with true-RMS accuracy, and includes selectable CAN termination for controlled network testing. Its secure, high-speed interface allows safe integration of scopes, scan tools, and other diagnostic equipment, making it an essential tool for precise fault-finding, signal analysis, and ECU development work.

• Real Time VRMS Voltage Monitoring on All OBDII Pins - the integrated LCD displays true RMS voltage across all 16 pins, delivering accurate diagnostics even on fluctuating or noisy circuits. Green background highlights active dynamic signals, while immediate alerts help identify power or ground issues on critical pins (4, 5, and 16).
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks. This helps improve signal integrity, reduce line reflections, and stabilise communication during advanced diagnostic work.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

The ET2031B Universal Line Kit is a versatile, multi function diagnostic set designed for fast, secure connection to vehicle wiring during general engine testing and circuit evaluation. It enables quick probing, signal access, and component activation across a wide range of automotive systems, making it an essential tool for efficient fault finding and reliable electrical diagnostics.

This kit comes with a bonus multimeter - offering a comprehensive diagnostic solution.

• Dual-Function LED Testers - these two-way LED circuit testers allow for quick identification of power and ground signals, making fault-finding faster and more intuitive.
• Black & Red Multimeter Connector Leads - ensuring reliable connectivity for a wide range of diagnostic tasks.
• Round Terminal Adapters (Male & Female) to Banana Plug - male and female round terminal adapters connect seamlessly to standard banana plugs; ideal for interfacing with OEM wiring and connectors.
• Flat Blade Terminal Adapters (Male & Female) to Banana Plug - Includes flat blade terminal adapters for compatibility with common automotive spade connectors, improving versatility during testing.
• Variable Resistors with Banana Terminals - adjustable resistors allow technicians to simulate loads, test sensor circuits, and diagnose voltage dependent faults with confidence.
• Needle Style Piercing Probes - designed for clean, precise back-probing without damaging insulation; perfect for modern fine gauge wiring.
• Heavy Duty Alligator Clips - these rugged clips provide strong, secure connections to battery posts, chassis grounds, or test points, ensuring stable readings during diagnostic work.

The test lead of choice for professionals. Compatible with all standard multimeters. Made in UK quality.

• Red & black test leads - straight | right angled plugs
• Crocodile clips | cable piercers | back probes

The Silvertronic Multi-Pin Connector Kit is a professional-grade solution designed for safe, accurate testing of connector-terminated circuits, especially in aerospace, automotive, and industrial environments.

This kit enables technicians to access and test small or hard-to-reach pins without compromising safety. Simply select small screw in pins to access connectors when standard test lead tips are too big and bulky.

Supplied in a hard case or reusable wallet that indicates if any pins are missing.

• IEC 1010 Rating: Rated to 1000V CAT II (600V CAT III), with double/reinforced insulation and bi-color silicone cable design to alert users to potential shock hazards

Kit components:

• Red / Black Double Insulated Silicone Test Lead. Terminated one end in a Right Angled 4mm Plug compatible with all standard 4mm instrument sockets, the other end terminated in a unique 'screw in pin socket'
• 2 sets of 4 screw in pins; each pin has both a male and female contact.
• Green double insulated earth lead with detachable large green crocodile clip.

A professional set of Avionic test leads featuring double insulated Silicone cables, with 250 copper stranding for high flexibility. Rated IEC 1010 1000V CAT III / 600V CAT IV 20 Amps.

• NSN 6625-01-618-9792

A professional avionics multi pin connector kit for flight line servicing of American military aircraft, and many others. The kit features aero leads that consist of single layered silicone, guaranteeing a high degree of flexibility.

• Compatible with standard 4mm instrument sockets.
• NSN: 6625-01-539-4613