Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings during battery disconnection / changeover. Simply connect the cable to vehicle's OBDII port, and other end to a 12V power source (using the alligator clips).

Always ensure that all vehicle electronics (such as air con, radio etc) are turned off prior to use to avoid blowing the fuse in the unit.

• 2.5m cable
• Alligator clips
• For 12V systems only

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• EC5 connector for lithium jump packs
• For 12V systems only

A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

A pair of double insulated silicone test leads one end terminating in a straight fixed shrouded plug, the other in a right angled plug, both compatible with standard 4mm instrument sockets.

• 1.2m length
• Made in UK quality

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

The Air Boy Brake Bleeder is a user-friendly and efficient tool designed for bleeding and refilling brake systems in all types of vehicles. This single person operation device ensures quick, clean, and hassle-free brake maintenance.

• Efficient Brake Bleeding - Allows for fast and effective removal of air from brake lines. Suction style brake bleeding - simply connect to the brake nipple.
• Single Person Operation - No need for additional assistance during the process.
• 1.2 Litre Container - Provides ample capacity for brake fluid collection.
• Compressed Air Powered - Operates at a working pressure of 6-12 bar with an air consumption of 180 l/min at 8 bar.
• Safety Valve Option - Prevents fluid atomization when the container is full.
• Versatile Use - Suitable for cars, motorcycles (separate adaptor required), and other closed fluid systems.
• Durable Construction - Made from high-quality materials including acetal plastic, EPDM gaskets, and TPU rubber nozzles.
• Replenishment kit available separately (124143155)

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• EC5 connector for lithium jump packs
• For 12V systems only

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings during battery disconnection / changeover. Simply connect the cable to vehicle's OBDII port, and other end to a 12V power source (using the alligator clips).

Always ensure that all vehicle electronics (such as air con, radio etc) are turned off prior to use to avoid blowing the fuse in the unit.

• 2.5m cable
• Alligator clips
• For 12V systems only

PPDRAW + PPFUSE Combo Pack - Diagnose Smarter, Save More Take full control of automotive diagnostics with this powerful pairing. The PPDRAW Draw Monitor connects via OBDII to supply 12V power, monitor battery voltage, and detect leakage currentÑplus it backs up vehicle memory during battery replacement. Pair it with the PPFUSE Fuse Monitor to track down parasitic draws across circuits with real-time amp readings, no fuse removal required.

Together, they offer unmatched accuracy, convenience, and mobilityÑeverything you need to monitor, diagnose, and repair electrical issues fast. Save by bundling both tools and streamline your diagnostic game .

This product is designed for use in monitoring car battery voltage, leakage current, and serving as a backup power supply when replacing the battery. The product is connected to the car's OBDII interface via an OBDII connection cable to supply 12V power to the car and monitor the car system's leakage current for diagnosing various faults. It can also serve as a backup power supply for the car during battery replacement, preventing the car's mainboard from losing power and data. Draw Monitor can also monitor battery voltage through the OBDII port. Please read the instruction manual carefully before using the product.

• Supplies up to 10 amps
• Connects via OBDII
• View and record data via Bluetooth on App
• USB-C rechargeable
• Adjustable current output alarm & adjustable auto power off setting
• Graphing mode
• Monitor function input: 0-30V
• Voltage display accuracy: 1%+5dig resolution 0.1V
• Current display accuracy: 3%+5dig resolution 1mA