Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• LED light indicates when external power source is active
• Fuse protects against current spikes

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• EC5 connector for lithium jump packs
• For 12V systems only

Replacement fuse for the battery saver cables. This fuse is rated at 4.5A, so that this fuse blows before the 5A fuse protecting the OBDII circuit in the vehicle.

A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

Silvertronic multimeter leads are made in the UK. Designed for professional use, Silvertronic silicone leads are double insulated.

Silicone leads can withstand high temperature, including the heat of such things as hot manifolds and soldering iron tips.

• 1000V CAT III 20A
• 2m long cables (colour coded)
• Extra thin 0.7mm OD
• Supplied in a 4 pocket test lead organiser for convenient storage.

A pair of double insulated silicone test leads one end terminating in a straight fixed shrouded plug, the other in a right angled plug, both compatible with standard 4mm instrument sockets.

• 1.2m length
• Made in UK quality

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• EC5 connector for lithium jump packs
• For 12V systems only

Save vehicle memory when changing batteries. This avoids loss of radio and other similar vehicle settings. Simply connect cable to vehicle's OBDII port, and other end to a 12V power source.

• LED light indicates when external power source is active
• Fuse protects against current spikes

PPDRAW + PPFUSE Combo Pack - Diagnose Smarter, Save More Take full control of automotive diagnostics with this powerful pairing. The PPDRAW Draw Monitor connects via OBDII to supply 12V power, monitor battery voltage, and detect leakage currentÑplus it backs up vehicle memory during battery replacement. Pair it with the PPFUSE Fuse Monitor to track down parasitic draws across circuits with real-time amp readings, no fuse removal required.

Together, they offer unmatched accuracy, convenience, and mobilityÑeverything you need to monitor, diagnose, and repair electrical issues fast. Save by bundling both tools and streamline your diagnostic game .

This product is designed for use in monitoring car battery voltage, leakage current, and serving as a backup power supply when replacing the battery. The product is connected to the car's OBDII interface via an OBDII connection cable to supply 12V power to the car and monitor the car system's leakage current for diagnosing various faults. It can also serve as a backup power supply for the car during battery replacement, preventing the car's mainboard from losing power and data. Draw Monitor can also monitor battery voltage through the OBDII port. Please read the instruction manual carefully before using the product.

• Supplies up to 10 amps
• Connects via OBDII
• View and record data via Bluetooth on App
• USB-C rechargeable
• Adjustable current output alarm & adjustable auto power off setting
• Graphing mode
• Monitor function input: 0-30V
• Voltage display accuracy: 1%+5dig resolution 0.1V
• Current display accuracy: 3%+5dig resolution 1mA