Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks. Simply pressurise using shop air.

The maximum pressure in most turbo systems is approximately 15 PSI - 25 PSI. When connecting the airline to these test caps, always regulate air pressure in the test to 25 PSI maximum. Over pressurisation will damage system components.

A graduated approach to leak testing is recommended. Start with 5 PSI to find large leaks, and progressively increase in 5 PSI increments.

• Kit includes 4 pairs of stepped adaptors to fit most sizes found on passenger vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 35-90mm

Our new updated radiator pressure test kit sets the new industry benchmark!

Faster, easier, and more comfortable to use, than existing kits.

Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.

• Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
• Updated pressure pump, coolant refill and adaptor design
• Faster refill speed - 91 ml / sec vs 37 ml
• Connectors are compatible with superceded adaptor kits

A precision instrument to accurately measure the strength of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue^¨ content. A very versatile unit, especially with the ability to measure AdBlue concentration.

• Temperature corrected prism for improved accuracy
• Adjustable focus eyepiece
• Simple calibration using distilled water
• Supplied with pipette & storage case

Need a simple / fast / accurate way to test brake fluid & coolant? Are your customers asking for a test report to prove the fluid needs changing? Looking for more service opportunities? Test each car that comes into the workshop...

One double ended strip tests both coolant and brake fluid.

Simply dip a test strip into fluid for 60 seconds.

Patented FASCAR copper testing technology.

• Double the service opportunities
• Dual Brake / Coolant test strips
• Provide customers with a test report

Diagnose blown gaskets, cracked blocks and cylinder heads. Indicates CO2 in cooling system by test fluid colour change. Use with cone adaptor or with ET1049 adaptors.

• Any combustion leak will cause the blue liquid to turn yellow within 60 seconds.

Digital measurement of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue® content.

This meter uses a rechargeable battery - DC3.7V 800mAH (not supplied).

• Easy to read 1.8" TFT colour display
• IP65 waterproof rating
• Automatic temperature compensation (ATC)

A simple / effective tool for checking antifreeze concentration. Avoid winter freeze ups / summer boil overs! Can be used with warm / cold radiators.

• Durable construction with composite body, and rubber bulb.

Number of floating discs indicates coolant strength. Checks condition of coolant antifreeze at both cold & hot temperatures. Orange disc shows over protection / loss of efficiency.

• Suits model Ethylene Glycol antifreeze, include OAT (organic acid technology) antifreeze.
• Reads in Celsius / Fahrenheit. Shows the lowest temperature to which the cooling system is protected