Digital measurement of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue® content.

This meter uses a rechargeable battery - DC3.7V 800mAH (not supplied).

• Easy to read 1.8" TFT colour display
• IP65 waterproof rating
• Automatic temperature compensation (ATC)

An extra heavy duty puller for disassembling even the most seized U joints in minutes on virtually all heavy duty commercial vehicles.

This puller is engineered to be used with 1" Sq Drv impact tools. Reduces the risk of damage to driveshafts, yokes, joints and bearing cups.

To use, simply remove all bolts from the bearing cup. Slide the puller over the drive line yoke. Turn forcing screw clockwise with impact wrench.

• Application: U-Joints with bearing cups 1-1/2" - 2.2" OD.
• Ensure forcing screw is always lubricated.

A specialised set of 4 pin lock nut sockets for driving lug lock nuts with external teeth. The kit contains sockets from 20mm - 72mm diameter.

Please refer to the kit components for details of individual sockets.

• 1/2" Sq Drv
• 60mm overall length

The Power Probe Fuse Monitor is designed to locate / isolate which circuit parasitic draw lies by measuring current across fuses without removing them. The PPFUSE can be used on Maxi, Mini, & ATC fuses with a maximum Amp rating of 80A. The Fuse Monitor calculates amp draw based on fuse size in real time. The PPFUSE is USB-C rechargeable, comes with a belt clip, has replaceable tips, and a work light.

• Locate parasitic draw across fuses
• The top of the tool shows inactive, active, or open for quick fuse diagnosis
• Accurately measures current without removing the fuse
• Ability to read Maxi, Mini, & ATC fuses up to 80A
• Belt clip
• Flashlight
• Replaceable tips
• Pair with the PPDRAW monitor to quantify parasitic draw and use the fuse monitor to isolate the source
• USB-C rechargable (420mAh lithium battery)
• Live current reading display (A)
• Screen hold
• Screen brightness control
• Accuracy down to 1mA
• Magnetic backing
• Auto rotating screen
• Auto shut-off

All in one diagnostic solution: Test (and power up) components, trace wiring faults, and expand diagnostic capability with advanced tips.

• Locate short & open circuits fast
• Complete diagnostic kit with PP3EZ & ECT3000
• Sleek hard case with foam insert
• Activate components with power or ground
• Includes PPAMP & PPPWM tip adapters

Ensure your vehicle's cooling system stays corrosion-free and efficient with the ET5676 Antifreeze pH Meter - a professional tool designed to accurately measure the pH level of antifreeze and coolant solutions.

With EV vehicles as coolant decays, the acidity can increase, causing corrosion within the cooling system. This tester allows for quick testing of the coolant PH.

• Most automotive coolants should have an acidity level greater than 7.5. Check manufacturer specifications for suitable PH range.
• Measuring range: 0.00 - 14.00 PH | Resolution: 0.01PH | Accuracy: /- 0.1PH
• Operating temperature: 0 - 50¡C (Auto temperature compensation: 0 - 50¡C)
3x LR44 batteries (included)

Need a simple / fast / accurate way to test brake fluid & coolant? Are your customers asking for a test report to prove the fluid needs changing? Looking for more service opportunities? Test each car that comes into the workshop...

One double ended strip tests both coolant and brake fluid.

Simply dip a test strip into fluid for 60 seconds.

Patented FASCAR copper testing technology.

• Double the service opportunities
• Dual Brake / Coolant test strips
• Provide customers with a test report

Diagnose blown gaskets, cracked blocks and cylinder heads. Indicates CO2 in cooling system by test fluid colour change. Use with cone adaptor or with ET1049 adaptors.

• Any combustion leak will cause the blue liquid to turn yellow within 60 seconds.

Digital measurement of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue® content.

This meter uses a rechargeable battery - DC3.7V 800mAH (not supplied).

• Easy to read 1.8" TFT colour display
• IP65 waterproof rating
• Automatic temperature compensation (ATC)

A simple / effective tool for checking antifreeze concentration. Avoid winter freeze ups / summer boil overs! Can be used with warm / cold radiators.

• Durable construction with composite body, and rubber bulb.

Number of floating discs indicates coolant strength. Checks condition of coolant antifreeze at both cold & hot temperatures. Orange disc shows over protection / loss of efficiency.

• Suits model Ethylene Glycol antifreeze, include OAT (organic acid technology) antifreeze.
• Reads in Celsius / Fahrenheit. Shows the lowest temperature to which the cooling system is protected