Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

Very sharp probes suitable for piercing cable. Kit comes with two probes, one for 8-18 gauge wire, and the other for 20-28 gauge wire.

4mm banana jacks suit all standard multimeters / Power Probe units.

• Yellow - suits 8-18 gauge wire
• Green - suits 20-28 gauge wire

The Power Probe Fuse Monitor is designed to locate / isolate which circuit parasitic draw lies by measuring current across fuses without removing them. The PPFUSE can be used on Maxi, Mini, & ATC fuses with a maximum Amp rating of 80A. The Fuse Monitor calculates amp draw based on fuse size in real time. The PPFUSE is USB-C rechargeable, comes with a belt clip, has replaceable tips, and a work light.

• Locate parasitic draw across fuses
• The top of the tool shows inactive, active, or open for quick fuse diagnosis
• Accurately measures current without removing the fuse
• Ability to read Maxi, Mini, & ATC fuses up to 80A
• Belt clip
• Flashlight
• Replaceable tips
• Pair with the PPDRAW monitor to quantify parasitic draw and use the fuse monitor to isolate the source
• USB-C rechargable (420mAh lithium battery)
• Live current reading display (A)
• Screen hold
• Screen brightness control
• Accuracy down to 1mA
• Magnetic backing
• Auto rotating screen
• Auto shut-off

The Power Probe PPTK0029 is a 20-foot extension cable designed for use with the Power Probe 4 and Maestro diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

The Power Probe PPTK0027 is a 20 foot extension cable for use with Power Probe 3 and 3EZ diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

• 20 foot extension cable
• Original part # PN3049

This clip set allows the Power Probe 3 circuit tester to be powered from any 12V source. Suits all Power Probe 3 models only.

• Original part # PN3046

A Power Probe cigarette adaptor for use with Power Probe 3 | 3S | 3EZ. Allows the Power Probe circuit tester to be powered through the vehicle's cigarette port.

• Original part # PN3048

Replacement 3" probe tips, suitable for all Power Probe circuit testers. These are the original tips supplied with each Power Probe unit. For a longer 6" tip, refer PPTK0043.

• With 4mm banana jack
• Original part # PN3015-BLK
• 2 pack

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector