This wrench is designed to help remove the coolant expansion tank cap fitted to a range of VAG vehicles from 2008. Due to their location, these caps can be difficult to access, and can be difficult to remove as the seals of the caps often stick.
- Applications: Audi A1 (from 2010) | A3 (from 2012) | Q2 (from 2016) | Q3 (form 2011) | A6 (from 2018), VW: Touran (from 2003) | Caddy III / IV (from 2015) | Passat (from 2010) | Tiguan (from 2007) | Golf VI / VII / VIII (from 2008), Amorok (from 2010), Jetta VI (from 2010), Beetle (from 2011) | Polo (from 2017) | T-Roc (from 2017) | T-Cross (from 2018) | ID.5 (from 2021)
- Suits OEM caps 2Q0121321 | 2Q0121321A (82mm across the flats | 20mm wide | 7 indents)
- 3/8" Sq Drv
| SKU | ET7050 |
| Barcode # | 9321280425590 |
| Brand | Automotive |
| Product weight | 0.2070kg |
| Shipping weight | 0.207000kg |
| Vehicle Make | VAG |
12 Months
More from this category
Audi Radiator / Coolant Cap Wrench
A specially designed wrench to install / remove coolant caps on Audi vehicles which have a locking mechanism.
This wrench is fitted with a tooth which depresses the cap release mechanism when pressure is applied.
- Fits Audi cap # 4MO-121-321-Q
- 3/8" Sq Drv
- Do not release the cap when the cooling system is under pressure and / or hot
Fan Nut Wrench | 32mm
Removes lock nuts on thermo viscous fans found on BMW | Ford (and other vehicles). Made from tempered pressed steel with PVC dipped handle.
- 32mm
- Straight design
- 380mm overall length
Ford Fan Clutch Holder
Specially designed slots fit over and grip firmly on three of the studs holding the viscous fan clutch assembly, to allow the release of the locking nut.
- Applications: Ford Falcon | Fairline, and many other vehicles.
- Length: 450mm (17-3/4")
Ford Fan Clutch Wrench
This set comprises a special clutch holder and nut wrench for replacing the water pump in Ford vehicles.
- 1-7/16" | 2-5/16" jaw openings