Made from TPR material, this organiser rack holds 15 wrenches. TPR is a softer plastic allowing wrenches to be held more securely, but still easily removeable.

This organiser rack is reverse facing. So when placed next to a standard forward facing organiser rack, the wrenches sizes still face towards you, while at the same time taking up less space in your toolbox.

A space saving design!

• Reverse facing
• Holds 15 wrenches
• Made from TPR material
• For use in toolbox or wall mounted

Our most powerful unit yet - now with 50W soldering power - for the most heavy duty tasks.

• 10 second fast start
• 45 minutes continuous runtime
• 5mm chisel tip / 1.5mm cone tip / heat shrink tip
• Packaged in plastic case with EVA tray

A specially designed wrench to install / remove coolant caps on Audi vehicles which have a locking mechanism.

This wrench is fitted with a tooth which depresses the cap release mechanism when pressure is applied.

• Fits Audi cap # 4MO-121-321-Q
• 3/8" Sq Drv
• Do not release the cap when the cooling system is under pressure and / or hot

• Suits most E60-E93 | F01-F86 vehicles
• 87mm (across flats) | 6 Indents
• 3/8" Sq Drv

This wrench is designed to help remove the coolant cap in vehicles where the coolant tank is positioned under the bulkhead making hand removal difficult.

• 60mm (across flats) | 6 indents
• 3/8" Sq Drv

Specially designed slots fit over and grip firmly on three of the studs holding the viscous fan clutch assembly, to allow the release of the locking nut.

• Applications: Ford Falcon | Fairline, and many other vehicles.
• Length: 450mm (17-3/4")

This set comprises a special clutch holder and nut wrench for replacing the water pump in Ford vehicles.

• 1-7/16" | 2-5/16" jaw openings

A specialised wrench set for fan clutch removal and replacement on Ford vehicles. Two hub wrenches (32mm & 36mm) and one special holding bar to fit fan clutches.

• Straight wrenches | 385mm (15-1/4") length
• 32mm | 36m jaw openings
• Ford fan clutch holder (DA3387)