The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

The Air Boy thrust gun is ideal for cleaning tasks where extremely high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

The standard nozzle supplied with the gun simply screws on / is replaceable. A 90 degree nozzle is available for purchase separately.

• 1/4" BSP inlet
• 300mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

The Air Boy Underseal Gun is a high-performance tool designed for applying corrosion protection coatings to vehicles. It ensures effective maintenance and treatment against rust and stone-chipping, making it an essential tool for automotive professionals.

• Suitable for water / oil based fluids
• Includes 900mm extension probe

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. Venturi nozzle offers no block safety functionality, and increased air flow via the Venturi principle.

• Fits all standard Air Boy blow guns, with 8mm diameter pipe.
• Made in Denmark.

This push fit style fitting connects onto the end of any standard Air Boy blow gun converting the gun into a super silent version.

The nozzle restricts airflow to 330 litres / minute while also reducing the noise of the blow gun (meets OSHA).

The push fit style design allows the nozzle to be easily removed by simply lifting up the collar.

• Works with all Air Boy 8mm dia blow guns
• Made in Denmark

90 degree nozzles attach to all Air Boy blow guns. 90 degree airflow is ideal for cleaning filters and other similar applications.

• Simply screws on (but cannot be removed once attached)

A handy kit that adds functionality to Air Boy blow guns. Push fit design locks onto pipe.

Features four push to connect nozzle tips, which can be easily removed by lifting collar.

Convenient plastic carry case also inclded.

• Rubber tip for blowing out pipes, silent / unlockable, venturi for extra air flow, and 90 degrees for blowing out filters.
• Safety shield to protect against blow back.
• Suitable for use with all standard Air Boy blow guns (with 8mm dia pipe).

The Air Boy TURBO nozzle makes any Air Boy blow gun (with 8mm pipe) unblockable and increases airflow by 100%. The bypass nozzle makes it possible for the blow gun to absorb air through the sides, which provides for extra high airflow. The air also flows through the holes in the side, should the tip be blocked.

• 34mm overall length
• Suits any Air Boy blow gun with 8mm tube
• Cannot be removed once attached

The Air Boy TURBO nozzle makes any Air Boy blow gun (with 6mm pipe) unblockable and increases airflow by 100%. The bypass nozzle makes it possible for the blow gun to absorb air through the sides, which provides for extra high airflow. The air also flows through the holes in the side, should the tip be blocked.

• 34mm overall length
• Suits any Air Boy blow gun with 6mm tube
• Cannot be removed once attached

Replacement nozzle for the Air Boy flat blow gun.

• Black POM
• 31.5mm blade width
• 58mm nozzle length
• 1/4" external thread