Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 25mm dia is suitable for flushing hoses up to 7/8".

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 35mm dia is suitable for flushing larger hoses.

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 25mm dia is suitable for flushing hoses up to 7/8".

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

The Air Boy 90 degree nozzle is now available in a new pushfit version. The function of the nozzle remains unchanged, but the pushfit connector makes it possible to remove the nozzle from the tip. The 90 degree nozzle is perfecct for cleaning out cylindrical filters etc.

The pushfit connector actively locks onto the blow gun pipe, and will not come off until the collar is lifted. Suits all 8mm dia Air Boy blow guns.

• Ideal for blowing out filters
• Works with all Air Boy 8mm dia blow guns
• Made in Denmark

All-in-one driver box to test all petrol injectors including the latest GDI Piezo injectors. Plus diesel injectors.

Ideal for bench testing injectors to see if they are opening correctly. Also use in conjunction with ultrasonic cleaners to better clean internal parts, or with injector nozzle tester to test spray pattern.

• Automatically detects injector type
• From 1Hz to 20Hz adjustable
• Supplied with 6 adaptors to connect to a fuel rail of a traditional petrol PFI injector tester
• Signal output cords for both petrol / diesel injectors
• Powered by 240V adaptor (not shown)

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 35mm dia is suitable for flushing larger hoses.

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

The Air Boy 90 degree nozzle is now available in a new pushfit version. The function of the nozzle remains unchanged, but the pushfit connector makes it possible to remove the nozzle from the tip. The 90 degree nozzle is perfecct for cleaning out cylindrical filters etc.

The pushfit connector actively locks onto the blow gun pipe, and will not come off until the collar is lifted. Suits all 8mm dia Air Boy blow guns.

• Ideal for blowing out filters
• Works with all Air Boy 8mm dia blow guns
• Made in Denmark

Replacement plastic nozzle for the 124142130 cleaning gun.

Replacement plastic nozzle for the 124142135 cleaning gun.

90 degree nozzles attach to all Air Boy blow guns. 90 degree airflow is ideal for cleaning filters and other similar applications.

• Simply screws on (but cannot be removed once attached)

A handy kit that adds functionality to Air Boy blow guns. Push fit design locks onto pipe.

Features four push to connect nozzle tips, which can be easily removed by lifting collar.

Convenient plastic carry case also inclded.

• Rubber tip for blowing out pipes, silent / unlockable, venturi for extra air flow, and 90 degrees for blowing out filters.
• Safety shield to protect against blow back.
• Suitable for use with all standard Air Boy blow guns (with 8mm dia pipe).