A professional adaptor kit for use with our ETWH505H pressure blake bleeder kit. This adaptor kit contains a wide range of vehicle specific adaptors, as well as universal style adaptors.

• Nitto style connectors
• 12 pce kit

The legendary driveway tyre inflator for Australian conditions - is now also available in a digital model. This digital model is suitable for inflating truck tyres.

Repair kit available 124MK3-RK

• Extremely robust aluminium body with protective rubber bumper - Long accurate life expectancy
• Small 'stubby' body is the lightest metal bodied digital inflator on the market - Easy to use with reduced fatigue
• Slimline biomorphic body shape gives increased comfort for the user - Fast to use and handle
• Higher pressure range for multiple applications 4 - 250 psi range (including trucks) - Versatile and flexible saving time and money
• Permanently backlit in use, auto off after 25 seconds no-use - Easy to read in dark workshops or at night - Increased flexibility saving cost and time
• Large screen and clear digits - Easy and quick to read - Increasing accuracy and speed of use
• IP54 - can be used indoors and outdoors, saving time and increasing service
• Individually tested and certified against national approved gauges - Guaranteed accuracy
• Long battery life - 400 hours of use - Replaceable 2 X AAA batteries power unit (supplied)
• 3 units of calibration toggle as standard - psi, bar & kPa
• 2 second button hold for calibration toggle
• Registered Design

A versatile heavy duty long handled riveter, suitable for alloy and stainless steel rivets - blind rivets / female nutcerts / male nutcerts.

• Stainless Rivets: To 6.4mm
• Nutcerts: To 12mm
• RivBolts: To 8mm

An essential set of popular sizes of brake caliper sockets used on Audi / VW / Porsche vehicles.

These sockets are specialised 7 Point & 10 Point sockets with a range of different diameters (which are measured from the inside rim of the sockets).

• 9mm | 10 Point - Audi Q7 / Touareg / Porsche
• 11.5mm | 10 Point - Porsche
• 14mm | 7 Point - Audi Q7
• 15mm | 10 Point - Audi Q7 / Porsche
• 20mm | 10 Point - Porsche Cayenne
• 22mm | 7 Point - Audi S5

This brake bleeder adaptor has been designed to allow pressure brake bleeding on the Ford Ranger from 2012 onwards. This cap screws directly onto the master brake cylinder.

• Suits Ford Ranger (2012 onwards) vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 41mm diameter

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Colorado / Isuzu D-Max vehicles.

• Suits Colorado / Isuzu D-Max vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 54mm diameter

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Honda vehicles.

• Suits Honda vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 55mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Honda vehicles.

• Suits Honda vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 74mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Mitsubishi vehicles.

• Suits Mitsubishi vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 34 mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Mitsubishi vehicles.

• Suits Mitsubishi vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 35.5mm dia