A workshop quality touch control ultrasonic cleaner. This larger size is ideal for cleaning manifolds as well as smaller parts. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 500 x 300 x 200mm
• Dual 33kHz (coarse) / 40kHz (intensive) frequency
• 600W ultrasonic power / 500W heating power
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer (1-99 minutes working time)
• Digital temperature setting (0-80 degrees C range)

A versatile heavy duty long handled riveter, suitable for alloy and stainless steel rivets - blind rivets / female nutcerts / male nutcerts.

• Stainless Rivets: To 6.4mm
• Nutcerts: To 12mm
• RivBolts: To 8mm

An extra long prybar with tang thru design. Ideal for heavy duty automotive / industrial prying work. Features a comfortable rubber handle, with a hardened shaft.

• 940mm overall length
• Bent tip

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Tesla S / X vehicles.

• Applications: Holden Colorado (2017-) | Ford Transit (2019-) | Mazda 3 (2015-) | Tesla S (2012-) / X (2015-)
• Nitto style connector fitting
• 36mm dia
• 3 Lug bayonet fitting
• OEM Code: 1086619 00 B

Our most powerful 12V jump starter, suitable even the largest SUVs / 4WDs. Extra grunt for the most demanding jump start applications!

New design includes updated USB-C fast charging port, plus USB-A / 12V cigarette ports. Conveniently charge using standard USB-C cable (charger not included).

This kit also inclides a memory saver cable to preserve vehicle memory when changing automotive batteries. Avoid losing radio settings etc.

• Up to 8L diesel!
• A must have for professional workshops.
• USB-A | USB-C | 12V DC outputs.
• 1400 Peak CCA
• 20,000 mAh battery
• Memory saver cable included
• Fast, convenient charging using type C cable

An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.

• Aluminium body and brass tip to prevent damage to the lift support
• Magnet to hold the tool in place while securing the clamp
• For up to 13mm struts

This brake bleeder adaptor has been designed to allow pressure brake bleeding on the Ford Ranger from 2012 onwards. This cap screws directly onto the master brake cylinder.

• Suits Ford Ranger (2012 onwards) vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 41mm diameter

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Colorado / Isuzu D-Max vehicles.

• Suits Colorado / Isuzu D-Max vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 54mm diameter

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Honda vehicles.

• Suits Honda vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 55mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Honda vehicles.

• Suits Honda vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 74mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Mitsubishi vehicles.

• Suits Mitsubishi vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 35.5mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Toyota vehicles.

• Suits Toyota vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 23mm dia