Engrave most materials with ease. A professional quality unit with steel housing.

• 13,000 blows / minute
• Hose length: 1.48m
• Air inlet: 1/4" NPT

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. 40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 240 x 140 x 100mm
• 120W ultrasonic power / 100W heating power
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system. This adaptor suits Ford / Mazda vehicles & Tesla model 3/Y.

This adaptor has a double o-ring design that seals to a depth of 14mm.

• Suits Ford / Mazda vehicles, as well as Tesla Model 3/Y (2017- ).
• Nitto style connector fitting
• Right angle connector
• Inner cap 36mm dia | Inner point to point 50mm (excluding lugs)
• 3 lug design
• Tesla OEM code: 1080578 00 C

Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.

• 2.8 litre capacity
• Supplied with 44mm adaptor (ETWH500BC-06) that suits many European (and BYD) vehicles
• Other adaptors available separately

An essential set of popular sizes of brake caliper sockets used on Audi / VW / Porsche vehicles.

These sockets are specialised 7 Point & 10 Point sockets with a range of different diameters (which are measured from the inside rim of the sockets).

• 9mm | 10 Point - Audi Q7 / Touareg / Porsche
• 11.5mm | 10 Point - Porsche
• 14mm | 7 Point - Audi Q7
• 15mm | 10 Point - Audi Q7 / Porsche
• 20mm | 10 Point - Porsche Cayenne
• 22mm | 7 Point - Audi S5

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Tesla S / X vehicles.

• Applications: Holden Colorado (2017-) | Ford Transit (2019-) | Mazda 3 (2015-) | Tesla S (2012-) / X (2015-)
• Nitto style connector fitting
• 36mm dia
• 3 Lug bayonet fitting
• OEM Code: 1086619 00 B

This brake bleeder adaptor has been designed to allow pressure brake bleeding on the Ford Ranger from 2012 onwards. This cap screws directly onto the master brake cylinder.

• Suits Ford Ranger (2012 onwards) vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 41mm diameter

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Colorado / Isuzu D-Max vehicles.

• Suits Colorado / Isuzu D-Max vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 54mm diameter

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Honda vehicles.

• Suits Honda vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 55mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Honda vehicles.

• Suits Honda vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 74mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Mitsubishi vehicles.

• Suits Mitsubishi vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 34 mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Mitsubishi vehicles.

• Suits Mitsubishi vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 35.5mm dia