Replacement rubber end connector for the Air Boy brake bleeder. This connector connects to the clear plastic hose using a nipple (124143256).

This rubber end connector can be purchased individually, or as part of the 124143155 brake bleeder refurbishment kit.

• For 124143100 Air Boy brake bleeder

Keep your Air Boy brake bleeder in great working condition! All consumable parts are easily replaceable with this renewal kit.

• O-ring
• Connector pin
• Plastic spring
• Connector hose
• Nipple
• End connector

• 8x10 12x14 13x15 16x18 17x19

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

The SmokeMan ET4396 is a compact, high-performance pressure brake designed for fast, clean, and reliable brake fluid exchange. This unit streamlines brake bleeding, allowing it to be undertaken by one person - no need for a second technician. Powered by the vehicle's own battery - no shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Includes premium adaptor kit

A specialised cleaning gun for helping to remove bacteria from the air conditioning system. The gun injects cleaning fluid directly into the air conditioner evaporator.

The cleaning detergent leaves a protective layer in the air conditioning system that keeps it clean and at the same time secures a clean odour in the car. As quality and functionality always matters to Air Boy, our AC Cleaner is both easy to use and produced in impact-resistant quality materials that makes the tool long lasting.

Use the 900 mm extension probe for deep evaporator cleaning, or easily switch to the included spray nozzle for standard cleaning gun functionality.

• Remove bacteria / odours
• Bonus Spray Nozzle - simply screw on.

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

The SmokeMan ET4396 is a compact, high-performance pressure brake designed for fast, clean, and reliable brake fluid exchange. This unit streamlines brake bleeding, allowing it to be undertaken by one person - no need for a second technician. Powered by the vehicle's own battery - no shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Includes premium adaptor kit

A specialised set of 4 pin lock nut sockets for driving lug lock nuts with external teeth. The kit contains sockets from 20mm - 72mm diameter.

Please refer to the kit components for details of individual sockets.

• 1/2" Sq Drv
• 60mm overall length

The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

A versatile tool for holding the camshaft gear when loosening / tightening the centre bolt. The adjustable jaw and replaceable pin sets makes this kit universal in application.

• This kit has been updated with two extra pin sets. These 5mm / 8mm pins are essential to suit late model VAG engines.

A professional advanced breakout box for invehicle diagnostics / bench ECU testing, supporting both 12V / 24V systems.

More than just a basic breakout box - it exposes every OBD-II pin, monitors live voltages (true RMS), provides optional CAN termination, and supports safe, fast hookup of other diagnostic devices.

Key features:

• Universal compatibility: Works seamlessly with both 12V and 24V OBDII systems.
• VRMS Voltage Monitoring In Real Time: LCD displays true RMS voltage on all 16 OBDII pins. Visual feedback shows dynamic signals (green background), and immediately alerts for power / ground issues (pins 4 / 5 / 16)
• Built-In CAN Termination Switch: Applies a 120 resistance across the CAN pair to compensate for missing termination during single-ECU or small bench networks, improving signal integrity and reducing reflections.
• Voltage Protection & Alarm System: Features automatic audible alarms for high/low voltage deviations and reverse polarity protection. Supports a maximum load current of 2A.