A specialised kit for removing seized injectors from Ford 2.0L EcoBlue engines, from approximately 2016 onwards. Injector removal is necessary for any service tasks that require the removal of the cam cover, cylinder head or cam shafts.
IMPORTANT NOTE: This kit is designed to remove seized injectors only. Using this kit will render any injector inoperable.
- Always ensure that the force screw is properly lubricated.
- OEM Equiv: 303-1690
Engine Code(s)
T8MA, T8MB, T7DB, T8CF, YNF6, YMF6, YNR6, BCCA, YNWS, YN2S, BLFB, BLRA, BCFB
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Ford | Endura | CA | BCCA | 2.0L | 2018 | 2021 |
| Ford | Transit Custom | VN | BCFB | 2.0L | 2019 | |
| Ford | Transit | VO | BLFB | 2.0L | 2019 | |
| Ford | Transit | VN | BLFB | 2.0L | 2019 | |
| Ford | Transit Custom | VN | BLFB | 2.0L | 2019 | |
| Ford | Transit | VO | BLRA | 2.0L | 2018 | |
| Ford | Focus | LZ | T7DB | 2.0L | 2014 | 2019 |
| Ford | Mondeo | MD | T8CF | 2.0L | 2015 | |
| Ford | Escape | ZG | T8MA | 2.0L | 2016 | 2018 |
| Ford | Escape | ZG | T8MB | 2.0L | 2016 | 2020 |
| Ford | Kuga | TF | T8MB | 2.0L | 2014 | 2016 |
| Ford | Transit | VN | YMF6 | 2.0L | 2016 | 2019 |
| Ford | Transit Custom | VN | YMF6 | 2.0L | 2016 | 2019 |
| Ford | Ranger | PX3 | YN2S | 2.0L | 2018 | 2022 |
| Ford | Ranger | PY, T6.2 | YN2S | 2.0L | 2022 | |
| Ford | Transit | VO | YNF6 | 2.0L | 2016 | |
| Ford | Transit | VO | YNR6 | 2.0L | 2017 | |
| Ford | Everest | UA | YNWS | 2.0L | 2018 |
303-1690
| SKU | ET8912 |
| Barcode # | 9321280413139 |
| Brand | Automotive |
| Product weight | 0.9500kg |
| Shipping weight | 0.950000kg |
12 Months
Others also bought
Mechanic's Stethoscope (6 Microphone)
Super sensitive stephoscope kit to quickly identify sources of noise, harshness or vibration.
Especially well suited for road testing / diagnosing simultaneously.
6 channel selector unit, with 6 pick up sensors and extra long cords.
Cushioned headphones.
More from this category
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle.
Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1593A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
Chrysler Injector Puller
This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.
Diesel Injection Line Wrench Kit
A specialised kit of diesel injection line wrenches. These open end 12 point crowsfoot sockets are designed for servicing the union nut on high pressure lines on common rail injection engines.
- 14mm | 17mm | 19mm
- 12 point
- 1/2" Sq Drv
Diesel Injector Nozzle Extractor
Designed for removal of the lower components of diesel injectors. This is necessary before beginning a complete injector rebuild.
Injector should be removed from the engine before using this tool. Mount injector securely on a bench before unscrewing the injector solenoid from the injector. For instance, using ET0321.
Do NOT use air tools with this tool.
- Applications: Bosch, Delphi, Denso, Siemens injectors
- Needle head dia: 12.5-13.5mm
- Clamping collar dia: 24mm