This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Suitable for low viscosity brake fluids.
• Supplied with European adaptor.

Air powered, simply requiring regulated working pressure of 5-8 bar (<100 l/min).

Australia's most comprehensive adaptor kit (24 pce) to suit Bosch, CAT, Cummins, Denso, Delphi, Siemens ...

• Revolutionary! Vibratory hammer action slashes removal time.
• M14 thread

A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.

This kit is designed to be used with a bridge, and injector pullers. These are available separately.

• M14 x 1.5 pitch Pulling Spindle 240mm long.
• M14 x 1.5 pitch Pulling Spindle 315mm long.
• M17 x 1.0 pitch Pulling Spindle 240mm long.
• M17 x 1.0 pitch Pulling Spindle 315mm long.
• M18 x 1.5 pitch Pulling Spindle 315mm long.
• M25 x 1.0 pitch Pulling Spindle 240mm long.

A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.

The special extraction bridge and pull spindle allows for quick / safe injector removal.

To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.

• Engine codes: M47TU | M57 | M57TU
• Spindle 16 (one side M17) for mounting in the injector
• 29mm socket for disassembling the electric unit
• Internal 6 Pt wrench for removing the injector needle

A specialised kit for removing seized diesel injectors from VAG TDI engines, along with BMW N47 | N57 engines. The removers have a special two jaw design to fix the injector and pull out with a sllide hammer.

• Engine codes: BMW N47 | N57, VAG ALH | ALU | 1Z
• OEM Equiv: T10055 | T10402 | T10415 | T10163 | T40055

A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1539A.

• Application: BMW 3.0L (2008 - 2016)
• Engine: N55 (from July 2013 onwards) - up to engine # 14407684
• OEM equiv: 130270 (13 0 270)

Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.

This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.