A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

• OEM Equiv: T40094 | T40095 | T40096
• Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
• For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

An updated comprehensive timing kit for late model belt driven petrol VAG engines. This kit includes an updated camshaft locking tool for post 2013 engines with Cylinder On Demand (COD).

For the camshaft holding kit refer ET1872A.

• Engines: 1.0L 3 Cyl | 1.2L TFSI | 1.4L TFSI / TSI
• Designed for petrol TSI / TFSI engines (direct injection, belt- or chain-driven) in the EA111 | EA211 engine families. Not compatible with diesel engines (e.g., TDI) or older indirect injection petrol engines
• Primarily covers VAG models from ~2007 to 2018, with emphasis on 2010-2016 for most applications. Later models with EA211 evolutions (post-2018) may require different tools

Comprehensive timing tool set for latest generation belt driven petrol TSI engines used across the VAG range. Includes support for 1.4L CoD (cylinder on demand) engines.

• OEM Equiv: T10340 | T10476 | T10477 | T10494 | T10499 | T10504

A comprehensive kit for locking the camshaft / crank in their timed position. This allows for the servicing of the camshaft drive chain. Includes guide pins required for aligning the supercharger (on those engines to which it is fitted).

• Engine codes: CBZA | CBZB
• Applications: Audi A1 | VW Beetle, Caddy, Golf, Passat | Skoda Fabia, Rapid, Roomster, Yeti.

Specialised locking tool kit for 5th generation diesel Blue Motion engines. Set includes crankshaft locking tools for both styles of VAG sprockets.

• For Gen 5 common rail diesels (Blue Motion)
• Applications include 1.6L | 2.0L TDi engines fitted to Audi A3 | A4 | A5 | A6 | Q5, VW Golf | Passat | Tiguan
• OEM equiv: T20102 (3359) | T10050 |T10051 | T10052 | T10100 | T10255 | T10264 | T10265 | T40098

A specialised kit for removing the camshaft sprocket from the taper on the camshaft on Pumpe Duse / common rail diesels. Includes a counter hold tool for loosening / tightening the camshaft hub bolt.

• Engines: 1.9L | 2.0L TDI
• OEM Equiv: T10051 | T10052

This tool locks the camshaft in position on 1.2L FSi / TFSi petrol engines found across the VAG range from 2009 - 2017.

Do not use this item as a holding tool when loosening / tightening the camshaft sprocket!

• Engine codes: CBZA | CBZB
• OEM Equiv: T10414

This master timing kit is designed for a wide range of EA211 TSi engines, allowing the technician to check / set camshaft timing without the need for computer based alignment tools.

This kit covers EA211 and EVO 4-cylinder TSi ACT engines, including 3 & 4-cylinder variants without ACT, TFSi CoD, TSi ACT, TFSi, and BlueGT TSi ACT.

• OEM equiv: VAS 611 007 | T10340 | T10499 | T10504
• Engine codes: refer website for further details
• Use only in conjunction with manufacturer repair manual

These specialised tools are designed to quickly / safely release the intake manifold pipe connections on a range of Audi / VW direct injection turbo charged petrol engines.

This set includes two different sized release tools.

• Engines: 1.0L | 1.2L | 1.4L FSI / TFSI
• Applications: Audi A1 | A3 | Q2, VW Beetle | Golf (13-) | Jetta | Polo | Up!
• OEM Equiv: T10527

A specialised wrench for counter holding the crankshaft pulley when loosening / tightening the centre bolt on selected VAG engines. This wrench has an angled shaft to assist access on transverse mounted engines.

• Engines: 1.0L | 1.2L | 1.4L 4V injection, toothed belt drive
• 750mm long fixed handle
• OEM Equiv: T10475

A very handy kit, with a wide range of interchangeable pins, for holding the camshaft gear when loosening / tightening the centre bolt.

The adjustable jaw opening / interchangeable pin sets allows this tool to be used almost universally, although with the addition of the T10554 counterhold tool, this kit is specifically designed for VAG vehicles.

• Adaptor sizes: ¯4.8mm, ¯6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm, cup 16mm x 20mm, Spline M10, M12
• OEM Equiv: T10172 | T10554

A popular timing tool kit for a wide range of common Audi / Skoda / VW vehicles including many 1.4 | 1.9 | 2.0 TDi PD DOHC engines.

• Includes two versions of the camshaft sprocket locking tool.
• For belt driven diesel engines.

An upgraded timing tool kit for VAG 1.2L | 1.4L | 1.6L TFSi / FSi engines.

• Applications: Audi A1, Skoda Fabia | Octavia | Roomster, VW Beetle | Golf | Jetta | Polo | Touran
• A DTI gauge (ET1101) is required, but not included in this kit, as most workshops will already have one.

This kit provides the essential camshaft | crankshaft tools for working on popular VAG vehicles with 1.4L FSI and 1.6L | 1.9L | 2.0 TDi PD engines fitted to MK5 - MK6 generation vehicles fitted with toothed timing belts.

This kit is suitable for use with cam belt kits including INA 531020110, Contitech CT1028K3, Gates K055569XS.

• OEM Equiv: 310-084 (T10008) | 310-085 (T10050) | T20102 | 310-1054 (T10115) | T10060 | T10100 | T10264 | T10265

This timing kit has been designed for VAG vehicles with 1.6L | 1.8L turbo chain driven engines from 2003. The kit includes a chain tensioner locking tool, a tensioner locking tool, camshaft alignment tool, and two camshaft / crankshaft pulley holding tools.

• Engine: 1.6L | 1.8L FSI (03-08)

A master injector removal kit for both 3 cylinder and 4 cylinder EA 211 engines. This kit is essential for the removal of the injectors, as well as for the assembly of the combustion chamber seal on the injector.

This kit also includes an injector brush tool to ensure clean and reliable seating of fuel injectors (for engines using direct fuel injection systems).

• Applications: 1.5L 4V EA 211 EVO turbo charger