12V / 24V Battery Tester w/ Printer 12V / 24V Battery Tester w/ Printer

12V / 24V Battery Tester w/ Printer

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

  • Tests all main battery standards
  • Max load voltage tests for 12V / 24V
  • Short circuit / reverse polarity protection

4-in-1 Engine Data Scan Computer 4-in-1 Engine Data Scan Computer

4-in-1 Engine Data Scan Computer

Ideal for anyone wanting to monitor their vehicle in real time. Simple one plug installation. Suits any OBDII compliant vehicle. Ideal for 4WD owners.

  • OBDII / EOBD code reader. Reads / clears engine codes. Turn off check engine light
  • Digital gauge displays up to 4 parameters providing real time engine performance analysis
  • Trip computer displays useful information such as average fuel consumption etc
  • Vehicle black box saving up to 300 hours of driving data.
  • Compatible with most 2006 & newer cars, SUVs etc.

Advanced 12V Battery System Tester

Advanced 12V Battery System Tester

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

  • Testing range: 100 - 2,000CCA
  • Powered from vehicle's 12V battery | no internal battery required

Battery Clamp Cable

Battery Clamp Cable

SKU: ET2709-BC

Battery Clamp Cable

Replacement battery cable clamp for the ET2709 code reader / battery tester.

CAN Breakout Box 12V / 24V CAN Breakout Box 12V / 24V

CAN Breakout Box 12V / 24V

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

  • Connect inline with scan tools, Or use with a multimeter / oscilloscope.
  • Quickly diagnose CAN faults.
  • Monitor battery voltage at the OBD port.
  • A great way to log pin voltage data when used with our ET2504 multimeter.

CanDo 6 / 9 Pin Round Connector CanDo 6 / 9 Pin Round Connector

CanDo 6 / 9 Pin Round Connector

This connector cable features a 9 Pin J1939 and a 6 Pin J1708 connector at one end, allowing easy access to heavy duty truck diagnostic ports, while the other end connects to a 16 Pin OBD2 diagnostic tool.

  • 6 / 9 Pin round connector

CanDo CAT 14 Pin Connector

CanDo CAT 14 Pin Connector

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

A specialised diagnostic cable to suit late model CAT equipment.

  • 14 pin ET3 connector cable
  • Equivalent to CAT 457-6114 cable

CanDo Connector Pack (5 Pce) CanDo Connector Pack (5 Pce)

CanDo Connector Pack (5 Pce)

An optional connector pack for the CanDo Pro Tab to provide extended diagnostic functionality.

  • JCB 8-PIN
  • Cummins 3-PIN
  • Kubota 4-PIN
  • Caterpillar 14-PIN
  • Komatsu 12-PIN

CanDo Cummins 3 Pin Connector CanDo Cummins 3 Pin Connector

CanDo Cummins 3 Pin Connector

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

  • Cummins 3 pin connector cable
  • Optional cable not supplied with the Pro Tab kit

CanDo Diesel 9 Pin Right Angle Locking Cable

CanDo Diesel 9 Pin Right Angle Locking Cable

An optional diagnostic cable for the CanDo Pro Tab heavy duty scan tool. This connector features a standard 9 pin diesel connector, but with a right angle connector that can lock onto the diagnostic port to avoid coming loose especially during road tests.

  • 9 Pin round connector
  • Right angle connector, with locking mechanism

CanDo Diesel 9 Pin Straight Locking Cable CanDo Diesel 9 Pin Straight Locking Cable

CanDo Diesel 9 Pin Straight Locking Cable

An optional diagnostic cable for the CanDo Pro Tab heavy duty scan tool. This connector features a standard 9 pin diesel connector, but with a connector that can lock onto the diagnostic port to avoid coming loose especially during road tests.

  • 9 Pin round connector
  • Straight connector, with locking mechanism

CanDo Doosan Bobcat 6 Connector CanDo Doosan Bobcat 6 Connector

CanDo Doosan Bobcat 6 Connector

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

This cable is an optional cable / not supplied with the CanDo Pro Tab.

  • Doosan Bobcat 6 connector

CanDo Doosan Heavy Duty 14 Pin Cable CanDo Doosan Heavy Duty 14 Pin Cable

CanDo Doosan Heavy Duty 14 Pin Cable

Caution: This cable is designed for Doosan Machinery ONLY. While it shares a 14 pin plug similar to the CanDo 14 Pin Benz Connector (ET2608-08), the Doosan application has an inverted ground. Use on early Mercedes Benz vehicles will directly short the supply line to ground. For further information, refer to the Cando Connector companion, or contact [email protected]

This is an OPTIONAL connector, and is not supplied as part of the standard ET2608 kit.

  • Applications: Doosan HD only (not Mercedes).
  • 14 pin connector
  • 38cm overall length

CanDo HD Tab Breakout Box Extension Cable

CanDo HD Tab Breakout Box Extension Cable

This cable is for use with the CanDo breakout box ONLY.

CanDo Iveco 38 Pin Connector CanDo Iveco 38 Pin Connector

CanDo Iveco 38 Pin Connector

This connector is part of the CanDo range of specialised truck diagnostic connectors. This connector is designed for use with the CanDo range of scan tools.

This is an optional cable and is not included in the standard CanDo cable kit.

  • Iveco 38 pin connector

CanDo JCB 8 Pin Connector CanDo JCB 8 Pin Connector

CanDo JCB 8 Pin Connector

SKU: ET2608-28

CanDo JCB 8 Pin Connector

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

  • JCB 8 pin connector cable
  • Optional cable not supplied with the Pro Tab kit

CanDo Komatsu 12 Pin Connector CanDo Komatsu 12 Pin Connector

CanDo Komatsu 12 Pin Connector

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

  • Komatsu 12 pin connector cable
  • Optional cable not supplied with the Pro Tab kit

CanDo Moto Pro Update | 12 Months

CanDo Moto Pro Update | 12 Months

12 month subscription update for CanDo Moto Pro scan tools. CanDo Moto Pro scan tools come with an industry leading free update period of 12 months. After this further 12 month updates can be purchased.

CanDo scan tools will continue to operate without subscription updates. CanDo offers an industry leading No Lockout policy.

CanDo Pro Tab 240V Adaptor

CanDo Pro Tab 240V Adaptor

SKU: ET2608-ADAP

CanDo Pro Tab 240V Adaptor

Replacement 240V charger for CanDo Pro Tab scan tools.

CanDo Scania 4 Pin Cable

CanDo Scania 4 Pin Cable

SKU: ET2608-38

CanDo Scania 4 Pin Cable

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

This cable is an optional cable / not supplied with the CanDo Pro Tab.

  • Scania 4 pin connector cable
  • Optional cable not supplied with the CanDo Pro Tab kit

CanDo Truck Code Reader CanDo Truck Code Reader

CanDo Truck Code Reader

The CanDo HD Code II Code Reader is a powerful diagnostic tool designed for heavy-duty, medium, and light-duty trucks, as well as Caterpillar equipment. It provides comprehensive coverage for J1587, J1708, and J1939 protocols, making it an essential device for mechanics and fleet operators.

  • Extensive Compatibility: Supports Class 4-8 trucks, Caterpillar Power Equipment, Construction, and Industrial vehicles.
  • Advanced Diagnostics: Reads and clears DTCs, views freeze frame data, and monitors live vehicle data.
  • DPF Resets & Regens: Works with Cummins, Detroit, International, Isuzu, and Fuso.
  • User-Friendly Interface: Features a large, easy-to-read screen and ergonomic design for effortless operation.
  • Lifetime Free Updates: Ensures continuous improvements and expanded vehicle coverage.