CanDo Komatsu 12 Pin Connector
SKU: ET2608-31
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
- Komatsu 12 pin connector cable
- Optional cable not supplied with the Pro Tab kit
| SKU | ET2608-31 |
| Barcode # | 9321280416383 |
| Brand | CanDo |
| Product weight | 0.1100kg |
| Shipping weight | 0.320000kg |
12 Months
Others also bought
Air Boy High Flow Thrust Gun | 1,000mm
The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.
This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.
The pipe is fitted with insulation that protects the hands against cold air.
- 1/4" BSP inlet
- 1,000mm long pipe
- Air flow: 600 litres / min @ 8 Bar
- Working pressure: max 12 Bar
- Noise level: 98.2Db @ 8 Bar
More from this category
Battery Clamp Cable
Replacement battery cable clamp for the ET2709 code reader / battery tester.
CAN Breakout Box 12V / 24V
An advanced CANbus circuit tester compatible with both 12V and 24V systems.
Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.
Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.
- Connect inline with scan tools, Or use with a multimeter / oscilloscope.
- Quickly diagnose CAN faults.
- Monitor battery voltage at the OBD port.
- A great way to log pin voltage data when used with our ET2504 multimeter.
