An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

• Connect inline with scan tools, Or use with a multimeter / oscilloscope.
• Quickly diagnose CAN faults.
• Monitor battery voltage at the OBD port.
• A great way to log pin voltage data when used with our ET2504 multimeter.

Updated version with 'sharp tip' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Sharp tip
• 185mm overall length

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.

A comprehensive tool set for removing alternator freewheel pulleys on a range of Bosch / Magneti Marelli type alternators.

This kit suits a wide range of vehicles including Audi | BMW | Fiat | Ford | Mercedes | Renault | Seat | VW.

• Includes Sockets: M10 Spline | T50 Torx (Bosch) | Bits: Hex - 8mm & 10mm | Spline - M8 & M10 | Torx T40 & T50
• 2x adaptors for Bosch / Magneti Morelli alternators a 1/2" Sq Drv >> hex adaptor, and 2x pulley connectors

A specialised crankshaft seal installation tools, for certain Audi V6 / V8 engines, to renew the PTFE crankshaft seal.

• OEM equiv: T40048A

A specialised 7 point Ribe socket for removing the radial mounting bolts on Audi RS ceramic brake calipers. These bolts are used on RSQ8 4M ceramic brake calipers on RS6 | RS8 vehicles.

• 7 Pt ribe socket
• 16mm dia x 50mm long
• 1/2" Sq Drv
• OEM equiv: 4M8615107C

A time saving tool to check the timing chain stretch on BMW and BMW MINI engines without dismantling the engine.

• Applications: BMW and MINI engine: 1.4, 1.6, 2.0 and 3.0L.
• Engine codes: N12, N13, N16, N18, N47 and N57 (petrol and diesel variants).
• OEM Equiv: 2 353 281 (2352281)

A specialised tool for removing / installing the rear springs on BMW E70 / E71 vehicles without the automatic ride height option.

• Applications: BMW E70 (X5) / E71 (X6)
• OEM equiv: 335 100 (335100)