Advanced tester for 12V motorcycle batteries. Tests battery condition. Prints test reports via PC.

Simply enter the battery rating (printed on the battery) and test results are showing on the LCD screen.

• Testing range: 20 - 300 CCA

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Manual type pressure tank to refill ATF on automatic transmissions without a dipstick. Includes 21 adapters for most common vehicles.

Tank with 6 litre / 1.5 gallon capacity, suitable for most transmissions - Audi, Ford, Holden, Mercedes, Nissan, Toyota, VW, and Volvo et c.

Specially designed tank base for feet to step on to stabilise the tank while pumping.

• Includes 21 adaptors

Test all 12V lead acid auto batteries including stop / start AGM & EFB. Also tests 12V & 24V starting and charging systems. Tests up to 2,000CCA.

• Testing range: 100 - 2,000 CCA
• Tests internal resistance
• Ripple voltage test

Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.

• 2.8 litre capacity
• Supplied with 44mm adaptor (ETWH500BC-06) that suits many European (and BYD) vehicles
• Other adaptors available separately

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Monitor battery status on all 12V automotive batteries. Wireless communication (up to 50m) by RF frequency. No need for cables / mobile phone app!

• Solar powered with internal battery (or charge via USB)
• Battery status (SOC / SOH / Voltage) etc. Plus check vehicle starting / charging systems.
• Easy dashboard mount / audible alerts.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

Advanced tester for 12V motorcycle batteries. Tests battery condition. Prints test reports via PC.

Simply enter the battery rating (printed on the battery) and test results are showing on the LCD screen.

• Testing range: 20 - 300 CCA

State of the art rugged professional design. Highly accurate. Will test all 12V lead acid automotive batteries, and 12V / 24V charging / crank systems.

Scan QR code on tester to bring up test report on any smart phone / tablet, and then easily email / text / share the report.

Browser based - no app needed!

• Testing range: 100 2,000 CCA

A precision instrument to accurately measure the strength of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue^¨ content. A very versatile unit, especially with the ability to measure AdBlue concentration.

• Temperature corrected prism for improved accuracy
• Adjustable focus eyepiece
• Simple calibration using distilled water
• Supplied with pipette & storage case