CanDo Optional Cable Pack
SKU: ET2608-OPT
Optional cable pack for the CanDo HD Pro Tab. These cables are either available as a kit (in quality plastic case), or are available separately.
- Iveco 38 pin connector (ET2608-25)
- Volvo Penta connector (ET2608-26)
- Doosan Bobcat 6 pin connector (ET2608-33)
- Doosan Bobcat 7 pin connector (ET2608-34A)
- Yanmar 6 pin connector (ET2608-35)
- Deutz connector (ET2608-36)
- Iveco 30-19pin connector (ET2608-37)
- Scania 4 pin connector (ET2608-38)
- Doosan HD 14 pin connector (ET2608-39)
- Isuzu 6 pin connector (ET2608-40)
- Isuzu 8 pin connector (ET2608-41)
CanDo Volvo Penta Connector
This connector is specifically designed for Volvo Penta engines. Easy connection to your engine's ECU via the standard diagnostic port - no special setup required.
Also suits Ag: Franz Kleine | MTS-Sandei, and OHW: Kalmar | Terbert | Sandvik.
- Volvo Penta engines (not J1939)
- 6 pin connector
CanDo Iveco 38 Pin Connector
This connector is part of the CanDo range of specialised truck diagnostic connectors. This connector is designed for use with the CanDo range of scan tools.
This is an optional cable and is not included in the standard CanDo cable kit.
- Iveco 38 pin connector
CanDo Doosan Bobcat 6 Connector
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Doosan Bobcat 6 connector
CanDo Yanmar 6 Connector
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Yanmar 6 connector
CanDo Deutz Connector
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Deutz connector cable
- Optional cable not supplied with the CanDo Pro Tab kit
CanDo Iveco 30 - 19 Pin Cable
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Iveco 30 - 19 pin connector cable
- Optional cable not supplied with the CanDo Pro Tab kit
CanDo Scania 4 Pin Cable
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Scania 4 pin connector cable
- Optional cable not supplied with the CanDo Pro Tab kit
CanDo Doosan Heavy Duty 14 Pin Cable
Caution: This cable is designed for Doosan Machinery ONLY. While it shares a 14 pin plug similar to the CanDo 14 Pin Benz Connector (ET2608-08), the Doosan application has an inverted ground. Use on early Mercedes Benz vehicles will directly short the supply line to ground. For further information, refer to the Cando Connector companion, or contact [email protected]
This is an OPTIONAL connector, and is not supplied as part of the standard ET2608 kit.
- Applications: Doosan HD only (not Mercedes).
- 14 pin connector
- 38cm overall length
CanDo Bobcat 7 Pin Connector
CanDo truck scan tools are supported by an extensive range of specific vehicle connectors. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional calbes.
This cable is an optional cable (not supplied with the CanDo Pro Tab).
- Doosan Bobcat 7 connector
CanDo Volvo Penta Connector
This connector is specifically designed for Volvo Penta engines. Easy connection to your engine's ECU via the standard diagnostic port - no special setup required.
Also suits Ag: Franz Kleine | MTS-Sandei, and OHW: Kalmar | Terbert | Sandvik.
- Volvo Penta engines (not J1939)
- 6 pin connector
CanDo Iveco 38 Pin Connector
This connector is part of the CanDo range of specialised truck diagnostic connectors. This connector is designed for use with the CanDo range of scan tools.
This is an optional cable and is not included in the standard CanDo cable kit.
- Iveco 38 pin connector
CanDo Doosan Bobcat 6 Connector
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Doosan Bobcat 6 connector
CanDo Yanmar 6 Connector
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Yanmar 6 connector
CanDo Deutz Connector
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Deutz connector cable
- Optional cable not supplied with the CanDo Pro Tab kit
CanDo Iveco 30 - 19 Pin Cable
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Iveco 30 - 19 pin connector cable
- Optional cable not supplied with the CanDo Pro Tab kit
CanDo Scania 4 Pin Cable
The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.
This cable is an optional cable / not supplied with the CanDo Pro Tab.
- Scania 4 pin connector cable
- Optional cable not supplied with the CanDo Pro Tab kit
CanDo Doosan Heavy Duty 14 Pin Cable
Caution: This cable is designed for Doosan Machinery ONLY. While it shares a 14 pin plug similar to the CanDo 14 Pin Benz Connector (ET2608-08), the Doosan application has an inverted ground. Use on early Mercedes Benz vehicles will directly short the supply line to ground. For further information, refer to the Cando Connector companion, or contact [email protected]
This is an OPTIONAL connector, and is not supplied as part of the standard ET2608 kit.
- Applications: Doosan HD only (not Mercedes).
- 14 pin connector
- 38cm overall length
CanDo Bobcat 7 Pin Connector
CanDo truck scan tools are supported by an extensive range of specific vehicle connectors. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional calbes.
This cable is an optional cable (not supplied with the CanDo Pro Tab).
- Doosan Bobcat 7 connector
| SKU | ET2608-OPT |
| Barcode # | 9321280430730 |
| Brand | CanDo |
| Product weight | 1.9200kg |
| Shipping weight | 2.190000kg |
Consumable
Calculate Shipping
Flat Rate Shipping - $19.25
$19.25 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
Power Probe 5V Tip Adaptor
Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.
Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.
- Current limited 5V output
- Safely test computer sensor circuits
- Provides 5V reference voltage
- 12 - 24V input
- 5V output
- Standard 4mm banana connector
ET2608-C5 Promo
CanDo Truck Scan Tool | HD Tab Pro
OE level functionality for Heavy Duty Truck, Agricultural & Industrial applications.
- Heavy, Medium & Light Duty truck coverage for all major Australia / Asian / European / US manufacturers, including Volvo & Iveco
- J1939 / J1708 and OBDII Protocols covered
- Agriculture / Industrial coverage includes Caterpillar, John Deere, Komatsu.
- Full Mercedes Sprinter coverage
- Perform DPF Regeneration; NOX Resets, Injector Programming, Change and Set Parameters, along with SCR/DEF coverage and full bi-directional controls covering over 60 manufacturers.
- Easy updates via WiFi
- IP65 rating | water resistant
- Remote diagnostics via TeamViewer
- Powerful 1.8GHz quadcore processor
- Includes: Multiple connectors, docking station
- Local Australian support
- Global coverage
- Bus, Commercial, Agriculture, Off Highway
- Free initial remote training consultation post purchase
- Australian based technical support only a phone call away
- We regularly test local Australian vehicles for any updates required
- Regular updates & bug fixes (rather than waiting for bi yearly fixes)
- 2 years free updates for all vehicle categories (a $2,800 value)
- No lock out once updates expire
- 4G Sim Card enabled
- Light Commercial now includes: Toyota Hilux / Landcruiser, Ford Ranger, Nissan Navara / Patrol, Isuzu D-Max, Holden Colorado
Haval Cooling System Pressure Test Cap
Specialised adaptor cap to connect to the cooling system expansion tank for leak pressure testing. This cap is suitable for late model Haval vehicles, including petrol engine and hybrid models.
- Applications: Haval H6 | H9 | Jolion
- M63 x P4.0
Chinese Vehicle Coolant System Test Cap Kit
Radiator test caps for major Chinese car makes, including BYD, Chery, Geely, GWM, Haval, LDV, and MG. Made with high quality and sturdy nylon materials.
Caps connect with a pressure pump (not included - ET1039-1) for leak tests. Or connect to a vacuum tool (not included - ET1039-PURGE) for coolant refill.
More from this category
Advanced CAN Breakout Box 12V | 24V
The ET3142 is a professional-grade breakout box designed for advanced in-vehicle diagnostics and bench-top ECU testing on both 12V and 24V systems. It exposes every OBDII pin for full signal access, monitors live circuit voltages with true-RMS accuracy, and includes selectable CAN termination for controlled network testing. Its secure, high-speed interface allows safe integration of scopes, scan tools, and other diagnostic equipment, making it an essential tool for precise fault-finding, signal analysis, and ECU development work.
- Real Time VRMS Voltage Monitoring on All OBDII Pins - the integrated LCD displays true RMS voltage across all 16 pins, delivering accurate diagnostics even on fluctuating or noisy circuits. Green background highlights active dynamic signals, while immediate alerts help identify power or ground issues on critical pins (4, 5, and 16).
- Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks. This helps improve signal integrity, reduce line reflections, and stabilise communication during advanced diagnostic work.
- Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.
Battery Clamp Cable
Replacement battery cable clamp for the ET2709 code reader / battery tester.
